Digital Oval Gear Flow Meter, LCD Display
2. Size: 1/2"
3. Flow Range: 0-30lpm
4. Meter material: aluminum
Pulser available
Port: NINGBO/SHANGHAI
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 200 Piece/Pieces per Week
Payment Terms: L/C,T/T,Western Union
Contact Supplier
Packaging Detail: in export standard cartons
Delivery Detail: in 15 days max
Digital oval gear meters for product delivery control and measurement are used in the private distribution of low, medium and high viscosity fluids such as fuel, lubrication oil and other special fluids compatible with the construction materials
Features:
1. wide range of product delivery measuring requirements in non-resale applications.
2. high precision and low pressure losses, compact lightweight design and easy installation.
3. An electronic card with microprocessor permits control of the display and calibration of the meter
4. Ease of use, compactness and the independent battery power supply make these products suitable for installation in both stationary systems on fluid transfer and distribution lines and in mobile applications as an accessory for delivery valves and guns and for all other industrial applications that require fluid delivery control.
5. Pulser version also available, this can provide an output to other fuel management / monitoring systems
6. Standard non-pulser versions are supplied complete with digital display, showing;
♦ Resettable batch total with floating decimal point between 0.001 to 999.99
♦ Non resettable total, 8-digit to 99999999
7. Body with aluminium measuring chamber
8. Oval gears made of acetalic resin
9. Pulse signal type: raw signal (reed switch), single channel
10. Electronic card with LCD housed in cover
Specification:
| Model Number | K400 | K400P |
| Display | Digital | None |
| Power Source | 2x1.5vDC Batteries | NA |
| Power Consumption | Unknown | NA |
| Output Signal | None | Open Collector 50v, 1.2A Max |
| Pulses Per Litre | None | 10 |
| Accuracy | ±0.5% | ±0.5% |
| User Calibration | Yes | Yes |
| Inlet / Outlet Fittings | 1/2" BSP Female | 1/2" BSP Female |
| Min Flowrate | 1 lpm | 1 lpm |
| Max Flowrate | 30 lpm | 30 lpm |
| Max Pressure | 70 Bar / 1015 PSI | 70 Bar / 1015 PSI |
| Pressure Loss | 0.5 Bar / 7.25 PSI | 0.5 Bar / 7.25 PSI |
| Temperature Range | Unknown | Unknown |
| Weight | 0.5 Kg | 0.5 Kg |
Electronic Oval Gear Flow Meter with pulser output
Other Industrial Flow Meter
Our Featured Products:
Model No.: CALMAS2
Features: 1 Flow Meter Industry's first Predictive Diagnostic System
2 advance warning of system failure crashes
Model No.: FZC300
Features: 1 comprehensive data analysis
2 No loss of historical information
3 all data sent from the flow meters is stored on an ABB
Model No.: LGWJ-15
Features: 1. Intelligent vortex flowmeter
2.liquids, gases and steam
3.Three-wire voltage pulse
4.Interface Thread: M20 x 1.5
Model No.: FMT200-ECO2
Features: 1Compact design (IF Design award)
2 Variable process adapters: tubes, threads, ISO-KF flanges DN25
3 Variable, adjustable
Model No.: FAM540
Features: 1 FAM541 Standard-line with flange connections
2 FAM544 Hygienic design
3 FAM545 with PTFE-liner for aggressive fluids
Model No.: MMASMF
Features: 1 suitable for all applications found in the water industry
2 potable to waste water treatment. MagMasteraas IP 68 rating
Model No.: FCU400-P
Features: 1 is a Signal combination .
2 high precision T measurement, summation,
3 High-precision differential temperature measureme
Model No.: FSM4000
Features: 1 Ideal for two-phase flow and non-homogeneous fluids
2 Easily measures pulsating flow applications
3 Fast start-up without
Model No.: FMT400-VTS
Features: 1 very low installation costs
2 huge turn-down ratio of 1:100
3 quick response time
Model No.: FAG1190
Features: 1 Stainless steel housing is standard
2 Safety protection tube to protect the user should the meter tube burst
Model No.: FMT200-D
Features: 1 Sensyflow FMT200-D is our compact specialist
2 for mass balancing of compressed air systems.
3 With a turndown ratio
Model No.: FAG6100
Features: 1 Stainless steel housing is standard
2 Safety protection tube to protect the user should the meter tube burst