Digital concrete compression tester 2000 kN - DC2000D

Digital motorized compression machine, To test concrete cubes up to 150 mm side and cylinders up to dia. 160x320 mm - more info check here: http://www.buymeasuringtools.com/Digital-concrete-compression-tester-2000-kN-10229291/

Quick Brief

Place of Origin: Egypt Brand Name: SCORP Co. Model Number: DC2000D Power: Electronic Usage: Compression Testing Machine Power: Electrically driven hydraulic power pack... Power Supply: 750W 220-240V 50-60Hz 1ph Standard: ASTMC39 EN 772-1 Max.Load capacity: 2000kN Maximum vertical clearance: 340 mm Maximum horizontal clearance: 320 mm Upper platen dimensions: 216 mm Lower platen dimensions: 216 mm Maximum ram travel: 50 mm Weight: 580 Kg

Product Features:

Digital motorized compression machine

To test concrete cubes up to 150 mm side and cylinders up to dia. 160x320 mm

Business Terms:

Port: any port in Egypt

Minimum Order Quantity: 1 Set/Sets

Payment Terms: L/C,T/T

Contact Supplier

Digital concrete compression tester 2000 kN

Specifications and Product Details:

Features:
High stability welded construction steel frame.
fitted with front and rear gates for operator protection.
Safety guards stops the machine when the door is open manufactured from highly resistant transparent polycarbonate and aluminium fram with hinges and lock.

Hydraulic system:
Piston having 50 mm stroke and cylinder are coupled with high quality packing set to allows the hydraulic circuit to work at low pressure with longer life of working components.
The manual pump is two stage for fast approach ram action and automatic change for test pressure.
The tank is foreseen of oil level and oil discharge.
Dial speed selector to visualize, pre-select and control the oil flow.
a dial device to visualize, pre-select and control the flow allowing fast approach ram device to avoid dead times as requested by Standards.
A movement indicator visualizes instant by instant the piston’s excursion during the compression test.

Digital Readout unit:
Test software in conformity with the new standards EN, UNI, BS, ASTM
Big internal memory that can keep more than 500 complete tests.
The firmware contains a memory of the mostly used specimens: area, weight, specific weight etc.
Operating firmware shall incorporate pre programmed standard sample sizes and pace rates with manual override.
Control firmware shall include special test routines for ACV and TPF.
Possibility to print on the incorporated thermal graphic printer.
Management of an eventual external laser or inkjet printer by means of a parallel port connection.
Windows-based download software and included RS232 cable which allows transferring the data to a PC (by means of MS Hyper-Terminal).

Motorized Pumping unit:
Hydraulic pressure: 0 ÷ 700 Bar
Oil supply from 0,05 to 0,7 litre/min.
Rated power: 750 W
Power supply: 220-240V, 1ph, 50 Hz.

Accessories as an option to be used with this model:
Flexural device to perform the flexural test
for two point and centre point tests on concrete beams 100x100x400mm and 150x150x600mm
Weight: 27 Kg

Compression device to test mortar prisms
40,1x40x160 mm broken in flexure
Dimensions: 153 x h182 mm
Weight: 12 Kg