Specifications
three phase meter, four wire, din rail type KWH meter
installation:35mm standard DIN rail
Current:5(30),10(60),20(100)
Application:
Three phase meter, four wire, LCD display, comply with international standard IEC 62053-21, 50HZ or 60HZ. And there are far infrared and RS485 communication module in it.
Functions and features:
- 35mm standard DIN rail installation, complying with standard DIN EN50022. Or front board installed (mounting holes center distance 63 mm), users can choose any one by themselves.
- Ten pole width (Modulus 12.5mm), complying with standard JB/T7121-1993.
- May select 6+1 digits display (999999.1kWh) or 5+2 digits display, it can be arbitrary set by users from far infrared or port of RS485 data communication.
- There are a polarity port of pulse output passive closed and a nonpolarity port of pulse output passive distant (the output rate is 10 or 100imp/ kWh, can select). Complying with standard IEC 62053-31 and DIN 43864.
- There are a port of far infrared data communication and a port of RS485 data communication. Standard configuration communication agreement complying with standard DL/T645-1997, can also choose any other communication agreement.
- Six LED instructions respectively every power supply state, signal of closed energy impulse and distant energy impulse and data communication state.
- Automatic detection the direction of the flow of load current. And Instructions on individual LED
- Single direction three components measure three phase four wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
- Standard configuration type S wiring (Inlet from bottom, outlet from top) for direct connect operation, we can also choose another type of wiring, and use CT (Product Configuration code is FC) and PT & CT (Product Configuration code is EC) for operation.
- Standard configuration short terminals cover, may select extension terminals cover, in order to protect to use safety. (Product Configuration code is GF).
Technical parameters
Model | Accuracy | Reference Voltage(V) | Current specifications(A) | Starting current(A) | Insulation performance |
DTS855 | Class 1 | 3×127/220 3×230/400 | 5(30) 10(60) 20(100) | 0.02 0.04 0.08 | AC voltage 4kv for 1 minute, 1.2/50us waveform impulse voltage |