Digital Ring Crush Tester(JQ-900) - JQ-900

Micro-Computer Ring Crush Strength Tester

cardboard compression tester is the board's basic equipment performance testing compressive strength (ie, paper packaging testing instruments), the test item are: base paper ring compression strength test (RCT), corrugated board compression strength test (ECT), corrugated board adhesive strength test (PAT), corrugated board flat crush strength test (FCT), corrugated base paper from the laboratory after the compression strength (CCT) peace compressive strength (CMT), using high-precision sensors, high-speed chip design, to ensure sampling accuracy. Its performance parameters and technical indicators in line with relevant national standards.

Feature

1. the apparatus of high precision, simple operation (can be ring crush, edge pressure, adhesive, pressure-strength test, etc.), stable and reliable performance.
2. using the NXP (Philip) high-performance ARM core processor and dual-channel 24-bit Cirrus independent high-speed sampling chip, high-speed operation to ensure accurate sampling and processing, and effective to ensure test accuracy.
3. automatic measurement sample, the maximum peak intelligent lock, powerful data management and analysis, 99 sets of data to save, print function, fault alarm and sensor non-linear correction function.
4. N, kgf, lbf switching between units.
5. real-time clock, eliminating manual input before printing the date or the date of the tedious hand-filling operations.
6. reserved for RS232, USB2.0 communication interface for easy connection to upgrade to the computer control.

1. range 60N ~ 3000N
2. Accuracy <1% (less than 0.3% measured)
3. the highest resolution 0.1N
4. plate test speed 12.5 ± 2.5mm/min
5. plate diameter 120 mm (according to customer request)
6. the maximum distance between the upper and lower plate 80mm
7. power source AC220V 3A 50Hz
8. Dimensions 360mm × 330mm × 510mm
9. Weight 55kg

Standard

1. GB / T 6546 corrugated board compression strength test

2. GB / T 6548 Determination of adhesive strength of corrugated board method

3. GB / T 2679.8 Paper and cardboard ring crush strength determination

4. GB / T 2679.6 corrugated paper Determination of flat crush strength

5. GB / T 22874 and single-sided corrugated board Determination of flat crush strength

4. Main features

Adopts microcomputer control technology, liquid crystal display in English, it
has the functions of test data processing and printout.

(1) High-speed return: Plate can return to the starting location at high-speed
automatically after finishing measurement by imported stepper motor driver, work
efficiency can be improved.
(2) Plate spacing settings: Set in a random manner by using imported stepper
motor. And it just relies on the button to set plate spacing without limit
switch.
(3) Thermal micro-print: Without print ribbon by imported thermal printer core
from Japan, and avoid troubles of placing ribbon and adding ink. It reduces the
failure rate greatly and achieves high-speed printing and low noise.
(4) Output display in English: Use liquid crystal display module, display in
English and prompt operating steps. Show the results of measurement and
statistics. Friendly human-computer interface make operation simple and
convenient.
(5) Multiple protection: The instrument uses multi-protection, it not only has
limit protection, but also has measuring ultra-range protection and over-current
protection. Make the operation more safe, stable and reliable.