Digital Planimeter,PJK-2000
1.Measure the area of anomalistic figure quickly .
2.Quality assurance
3.Best price
Port: SHENZHEN
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 1000 Piece/Pieces per Month
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: in case and color box
Delivery Detail: depends on quantity of order
PJK-2000 digital planimeter
1. Purpose
PJK-2000 can measure the area of anomalistic figure quickly .It can be used in agriculture, forestry, geology, water conservancy, field investigation. It is the most popular use for research
2. Technical parameter:
Maximum area measure range: width 300mm, no limited of length
Relative error :±0.2 %
Display: LCD with 16 Lattices
Power: battery DC 6V
Weight:1.25Kg
Size: 260×180×40 (mm)
3. Characteristic
a) Can be enact any proportion.
b) Variety unit can be apply: hectare , Km2, m2, cm2, ac ,mi2, ft2, in2.
c) 8 memory location:
d) Add up the area several times.
e) Can calculate the average of a area.
f) Unit conversion.
4. Configuration
It is including the mainframe and the power charger
5. The button and display
“Scale” enacts any proportion “f 1” calculate average
“Unit” mean the measure unit “f 2” add up the area
“Test” to checkout before leave factory “f 3” to clear the memory
“Esc” to change the function key, should use this button “f 4” to show the memory
“Reset” initialize “f 5” memory
“Trace” control the trace of figure "Enter"to confirm
6. How to use
a) Calculate the average of a area
e.g.: scale 1:10, unit : m 2 as on the figure 3.
1) Prepare
Choice “a” is the start point, the “a” is the approximate center of the figure. Let the red point of the tracer on the “a”.
2) Let the power “ON”, the instrument display measure 0. ,press the button of unit , we can see MODULE cm2 , press m2/1 display MODULE m2 , press enter display area 0.0m2 , press scale display SCALE 1:-- ,press m2/1 cm2/0 display SCALE 1:10 , press enter display area 0.0m2 , press trace display TRACE 0.0m2, then let the red point of the tracer according to the figure clockwise, until back to the point “a”. Press enter display S: X.X m2 , X.X mean the area of the figure. Press f 5 display STOCK, press m2/1 display STOCK 01 . Press enter display TRACE 0.0 m2, got the memory of the area in the m2/1 .