1.Digital LCR with transformer test
2.Frequency: 20Hz-300KHz
3.DC bias voltage
4.10-points list sweep
5.High quality with CE
Port: Shanghai
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 50 Set/Sets per Month
Payment Terms: T/T
Contact Supplier
TH2818 is an auto component analyzer with high accuracy, wide measurement range and six-digit resolution. TH2818 can be used for incoming inspection of components, quality control on product line and laboratory use over a wide measurement range up to 300kHz with step of 0.01Hz, signal level from 5 mV to 2V, and DC internal bias voltage. HANDLER, GPIB, RS232C interfaces help build an automatic component measurement system, communicate with the computer and record the test results.
Measurement function | |
Measurement parameter | |Z|, |Y|, C, L, X, B, R, G, D, Q, θ DCR, Turn-Ratio, Phase |
Basic accuracy | 0.05% |
Equivalent circuit | Series, parallel |
Mathematical function | ΔABS, Δ% |
Range mode | Auto, Hold, Manual |
Trigger mode | Internal, Manual, External, BUS |
Measurement Time (≥1kHz) | Fast: 32ms, Medium: 90ms, Slow: 650ms |
Average time | 1—255 |
Delay time | 0—60s, with step of 1ms |
Calibration function | Open/short frequency point, full frequency correction, Load correction |
Measurement terminal | 5-terminal |
Display mode | Direct, Δ, Δ%, V/I (voltage/current monitor) |
Display | 320×240 dot-matrix graphic LCD display with 6-digit resolution |
Measurement signal | |
Signal frequency | 20 Hz-300 kHz, with resolution of 10mHz |
Output impedance | Turns measurement: ≤2V, 10Ω; >2V, 30Ω Others: 30Ω , 100Ω selectable |
Test level | LCR measurement: 5mV-2V Turns measurement: 5mV-4V Automatic level range: 10mV-1V Resolution: 1mV, accuracy: 5% |
DC bias source | 0V, 1.5V, 2V, accuracy: 1% 0-10V DC bias voltage and 0-100mA DC bias current can be added while using TH1802A |
Measurement display range | |
|Z|, R, X | 0.00001Ω — 99.9999MΩ |
DCR | 0.001Ω — 99.9999MΩ |
|Y|, G, B | 0.0000µS — 99.9999S |
C | 0.00001pF — 9.9999F |
L | 0.00001µH — 9999.99H |
D | 0.00001 — 9.99999 |
Q | 0.00001 — 99999.9 |
θ (DEG) | -179.999º — 179.999 º |
θ (RAD) | -3.14159 — 3.14159 |
Turn-Ratio | 1:0.01—1:100 |
Δ% | -999.999% — 999.999% |
Comparator and interface | |
Comparator | 10-bin sorting, bin counter |
Memory | 20 sets of instrument settings saved |
Interface | RS232C, USB disk adapter (option), Handler (option), GPIB (option) |