1.pressure testing machine
2.Piston diameter:130mm
3.Net weight:400Kg
4.Resolution:0.01kN
5.Power:0.75 kW
Port: YanTian
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 400 Set/Sets per Month
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram
Contact SupplierPackaging Detail: BY WOODEN CASE
Delivery Detail: Within 20 days when get 30%downpayment.
Digital Electro-hydraulic pressure testing machine
Product summary:
Digital Electro-hydraulic pressure testing machine is mainly used for brick, stone, cement, concrete and other building materials,
compressive strength test, can also be used to test the mechanical properties of other materials.
Hydraulic System:
The oil tank is sucked through the filter screen and be inhaled pump oil ,through the petroleum pipeline of oil pump transport to
oil valve,When the hand wheel to send off the oil, due to the role of oil will push the piston, the oil from the return pipe to tank,
when the hand wheel to open get the oil, then the working fluid into the fuel tank through the tubing, pressure tubing through
and through oil return valve to tank.
Control system:
This machine adopts hydraulic loading, electronic measuring, with a load of figures, the loading rate shows that the maximum
load to maintain, as well as overload protection and power data retention and other functions.
Safety protection device:
When the test force more than 3% of the maximum test force, the overload protection, oil pump motor shut down.
Fixture:
Whole set fextures include: a set compression platen fixture
Technical specifications:
Max load KN | 100kN (resist bend) | 300kN (resist bend) | 302kN (resist bend and compress) |
Test force measuring range KN | 4%-100%FS | ||
Test Force showed the relative error | ≤indicating value±1% | ||
Test Force Resolution | 0.01kN | ||
Hydraulic pump rated pressure | 27MPa | ||
Bearing compress plate size | φ155mm | ||
Maximum distance between the upper and lower plate | 230mm | ||
Resist bending roll diameter | φ32mm | ||
Maximum distance between the upper and lower resist bending rollers | 165mm | ||
between two bending rollers upon the center distance | 150mm | ||
between two bending rollers under the center distance | 450mm | ||
Piston diameter | φ130mm | ||
Piston stroke | 80mm | ||
Motor Power | 3 phase 0.75 kW | ||
Outside dimension mm | 850×620×1340mm | ||
Net weight | 400Kg |