Melt Flow Indexer
1.LCD display
2.Standard:ISO 1133,ASTM D1238
3.Determining the melt flow rate (MFR)
Port: BY NEGOTIATION
Minimum Order Quantity: 1 Unit/Units BY NEGOTIATION
Supply Ability: 100 Unit/Units per Year 10/M
Payment Terms: L/C,T/T,BY NEGOTIATION
Contact SupplierPackaging Detail: wooden packaging
Delivery Detail: 30D max
Application:
DW5450D Melt Flow Index Tester is used to determine the melt flow rate (MFR) of plastics and resins. It is suitable for engineering plastics of higher melting temperature, such as polycarbonate, fluoroplastic, polyamide, and plastics of lower melting temperature, such as polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, POM, polycarbonate resin, etc. It is widely used for plastic production, plastic product industry, petrochemical industry, related education school, scientific research unit and commodity inspection department.
Related Standards:
STANDARDS | ISO 1133 | ASTM D1238 | GB/T 3682 |
Note: this tester can conform to but not limit to all the standards above, for more standards conformance, please contact us.
Key Specification:
l Measurement range 0.1~100g/10min
l Outlet diameter Φ2.095±0.005mm
l Outlet length 8.000±0.025mm
l Barrel diameter Φ9.550±0.025mm
l Barrel length 152± 0.1mm
l Piston head diameter 9.475±0.015mm
l Piston head length 6.350±0.100mm
l Temperature range room temperature~400°C (500°C is optional)
l Temperature accuracy ±0.5°C
l Temperature resolution 0.1°C
l Recovery time of temperature less than 4min
l Power supply AC220V±10% , 50Hz