1.DTS866 three phase electronic energy meter
2.with RS-485 and infrared communication function
3.LCD display
4.IEC62053-21
Port: ningbo or shanghai
Minimum Order Quantity: 50 Piece/Pieces
Supply Ability: 10000 Piece/Pieces per Month
Payment Terms: L/C,T/T,Western Union
Contact Supplier
Packaging Detail: form+carton
Delivery Detail: about 10 working days after receive payment
DTS866 three phase four wire active electronic energy meter with RS485 communication,LCD display.
The meter is used to measure 50Hz or 60Hz active energy consumption from three phase four wire AC electricity net.
The meter adopts LSI (Large-scale Integration) and SMTmanufacturing technique,the key components and part all adopts long life type.
The meter is widely used in office buildings, shopping malls, residences, airports and metro,etc.
The meter has RS485 communication module,it’s convenient to meter-reading.
FUNCTIONS AND FEATURES:
♦Meter cover ABS and meter base ABS,.Meter terminal block is made of bakelite material which is moisture-resistant,fire-retardant, high temperature molded.
♦LCD display,may selete cyclometer display.
♦Standard configuration one port of pulse output passive (polarity),may select increase a distant port of pulse output passive
(nonpolarity),and contact with all kind of AMR system conveniently.
♦There is a port of RS485 data communication.Standard configuration communication agreement complying with standard DL/T645-1997,can also choose any other communication agreement.
♦Six LED instructions phase,impulse,communication,etc.
♦Single direction measures three phase four wire active power consumption.It is nothing with direction of the flow of load current,
complying with standard IEC62053-21,IEC62052-11.
♦Directly connect operation or through CT or PT & CT.
♦Adopts high reliable and long-life electric components,hioverload, do not need to calibrate for long-term operation
♦Standard configuration short terminal cover,which is helpful to reduce installation space and make it convenient to install.May
select extended terminal cover,which is for protecting the safety of using electricity..
TECHNICAL PARAMETERS | |
| Accuracy class | Class 1.0, |
| Rated voltage(V) | 3 x 220/380, 3 x 230/400, 3x240/415.etc. |
| Rated current(A) | 1.5(6), 3(6), 5(20), 10(40), 15(60), 20(80), 30(100),etc. |
| Rated frequency | 50Hz or 60Hz |
| Operation voltage range | Un±20% |
| Insulation capabilities | AC voltage withstand 2kV for 1 minute; Impulse voltage withstand: 6kV-1.2/50 μs waveform |
| Starting current | Input through CT: 0.2%Ib; Directly input: 0.4%Ib |
| Power consumption | Voltage circuit ≤1W 5VA; Current circuit ≤0.5VA |
| Max.operation temperature | -40°C ~ +80°C |
| Max.storage temperature | -45°C ~ +85°C |
| RS 485Communication | Baud Rate: 1200bps~2400bps |
| Remote pulse output | Pulse width: 80ms ± 20ms |
| Relative Humidity | ≤85% |
*Please advise us if you have any different specifications,we can make according to your special requirements. | |
Model No.: Three-phase Meter
Features: Reactive Watt-hour Meter;
High overload, low power consumption;
Three-phase;
Electronic Reactive Watt-hour Meter DTX988;
Model No.: Prepaid Watt-hour Meter
Features: Prepaid Watt-hour Meter;
Pre-payment;
Load control;
Three-phase;
Electronic Prepaid Watt-hour Meter DTSY988;
Model No.: Active and Reactive Watt-hour Met...
Features: Active and Reactive Watt-hour Meter;
Three-phase;
Active and Reactive Watt-hour Meter DT(X)S988;
Model No.: DDS-353
Features: We design and produce very large quantity for single phase electronic kwh meter.
Model No.: DDS-1Y(electricity meter)
Features: We can design and manufactur single phase electricity meter with wired-infrared,overload protection.
Model No.: PZ72-DI
Features: Measure DC current, voltage, power, energy
RS485 modbus-RTU
CE MARK (EMC, LVD), RoHS Mark
LED display,72*72mm size
Model No.: ACR330ELH
Features: Measure all the data of 3 phase+kWh, +kvarh, kvah, -kWh, -kvarh, Up to 31 harmonicsRS485Power qualityCE (EMC, LVD)
Model No.: PZ-M32
Features: Remote Terminal Unit
32 circuit 0-20mA/0-5V analog inputs
RS485 (Modbus-RTU)
IEC61000
Model No.: JY-2E
Features: Electric Energy Meter ( rs 485 power meter, multimeter, intelligent energy meter ) : a new kind of meter good for your market!
Model No.: JY-2E
Features: Multi Function Electric Energy Meter( rs 485 power meter, multimeter, intelligent energy meter ): a new product best quality!
Model No.: Single-phase Meter
Features: Electricity Meter;
Local Payment-controlled;
Single-phase;
Pre-payment;
Local Payment-controlled Smart Electricity Meter;
Model No.: Single-phase Meter
Features: Prepaid Watt-hour Meter;
Electricity Meter;
Single-phase;
Pre-payment and load control;
Prepaid Watt-hour Meter DDSY988;