Home  >  Electrical Instruments  >  Energy Meters

DT862 Three Phase Energy Meter - DT862

The DT862 three-phase fore-wire meter is designed to meet the latest IEC62053-21,IEC62052-11,measuring active energy meter. - more info check here: http://www.buymeasuringtools.com/DT862-Three-Phase-Energy-Meter-10301558/

Quick Brief

Place of Origin: Zhejiang China (Mainland) Brand Name: OEM Model Number: DT862 Display Type: Analog Only Phase: Three Phase Measuring Energy Range: 5-20A 10-40A 20-80A 30-... Accuracy Class: 2.0 Output Voltage: 220V Mechanical Watt Hour Meter: Three phase Kwh Met...

Product Features:

The DT862 three-phase fore-wire meter is designed to meet the latest IEC62053-21,IEC62052-11,measuring active energy meter.

Business Terms:

Port: Ningbo or shanghai

Minimum Order Quantity: 100 Piece/Pieces

Supply Ability: 3000 Piece/Pieces per Month

Payment Terms: L/C,T/T,Western Union,MoneyGram

Contact Supplier
DT862 Three Phase Energy Meter
Share to: Facebook Twitter LinkedIn Google+

Product Packagings & Delivery Terms:

Packaging Detail: 10PCS/CTNS

Delivery Detail: 15days with advanced deposit

Specifications and Product Details:

  • Construction
  • Meter case
  • It meets the protection requirements set by protection class IP53 of IEC62053-21. The series types of cases and terminal covers are available.
  • Terminals
  • The connection terminals are made for nickel-plated brass with features of high mechanical Strength, good conductivity and corrosion-resistance.
  • Terminal block
  • The terminal block is injection molded of heat-and fire-resistant Bakelite . The voltage test link can be located inside or outside of the meter case.
  • Driving system
  • The driving system employs three single electromagnet elements, all of which are mounted on the meter frame with three screws. Each electromagnet element consists of voltage element, current element and connection board. In addition, the voltage electromagnet has low load and inductive load adjustment mechanisms. The current element employs a simple and reliable load curve compensation mechanism to ensure the flat characteristic curve.
  • Rotor
  • The rotor shaft is turned of high strength aluminum alloy. The upper end of the shaft is pressed with a worm which is made of thermoplastic, and the lower end is embedded with a graphite bearing which is self-lubricative and friction-resistant to ensure long service life of the meter.
  • Braking element
  • The magnet is made of AINiCo5 alloy and designed as U-shaped so that the effect of short-time over currents upon the magnet is negligible. A temperature compensation plate, made of a special alloy, is embedded in the braking magnet. The rotor speed can be adjusted largely and continuously by rotating the whole magnet.
  • Frame
  • The frame is die-casted by high quality Si Al alloy. Its structure is designed as W-shaped of stable property to avoid distortion, and its surface is treated with chromate to achieve reliable and durable coating against oxidation.
  • Upper bearing
  • The pin is made of abrasion-proof stainless steel, and pressed into the brass sleeve. It is the rotor guide and runs in the plastic worm of the rotor.
  • Lower bearing
  • The magnetic suspension bearing consists of two ring shaped magnets, a guide pin and a bearing base. The pin made of stainless steel runs in the graphite sleeve of the rotor. No lubrication is needed.
  • Register
  • The cyclometer type register consists of six drums. It can be read directly. The drum is made of polycarbonate. The framework is embedded with a high-strength self-lubricating plastic bearing. No lubrication of bearings is needed during the service life.
  • Technical data
  • 1Meter typeDT862
    2Applicable StandardsIEC60521,IEC514
    3Accuracy class
    (according to IEC 60521)
    Transformer
    operated: Class 1
    Direct connected:
    Class2
    4Average service life (MTTF)20 years
    5Basic current (lb) A1.5 3 5 5 10 15 20 30
    6Maximum current (lmax) A6 6 10 20 40 60 80 100
    7Rating current of transformer In5A Direct connection
    8Reference voltage Un3×57.7/100V,3×220/380V
    3×230/400V,3×240/415V
    9Reference frequency fn50Hz,60Hz
    10Power losses in voltage circuit at 50Hz Un1.0W/4.5VA
    11Power losses in current circuit at 50Hz Un Ib<0.5VA
    12Non-running with no-load0.8~1.1Un
    13Starting current0.4%Ib 0.5%Ib
    14Mean temperature coefficient
    From 0.1Ib to Imax at unity PF
    From 0.2Ib to Imax at unity 0.5 lagging
    <0.08%/°C
    <0.12%/°C
    15Insulation level
    Withstand A. C. Voltage for 50Hz, 1min
    >2kV(when bakelite base>4kV)
    >6KV(when bakelite base>8kV)
    16Rated load torque at unity PF, Ib>800µMn
    17Weight of rotor48g
    18Weight of meter≈3.5kg
    19Meter baseSteel, Bakelite, PC
    20Meter coverBakelite, transparent PC
    21Terminal coverABS, Bakelite, PC
    22RegisterCyclometer single, Unidirectional, Jumping
    23OptionReverse running stopper
  • DT862 Three Phase Energy Meter suppliers    DT862 Three Phase Energy Meter manufacturers