DSO1152S 150MHz Handheld Oscilloscope/Multimeter DOS1152S

DSO1152S 150MHz Handheld Oscilloscope/Multimeter - DOS1152S

*1M Memory Depth, *Waveform Math: Add, Subtract, Multiply, and Divide, *Dimensions (mm):240(L)x165(W)x50(H) - more info check here: http://www.buymeasuringtools.com/DSO1152S-150MHz-Handheld-Oscilloscope-Multimeter-10032005/

Quick Brief

Place of Origin: Guangdong China (Mainland) Brand Name: youfutools Model Number: DOS1152S Bandwidth: 150MHz Real-time Sample Rate: 1GSa/s Equivalent Sample Rate: 25GSa/s SEC/DIV Range: 2nS/div-2000S/div (in a 2, 4, 8 ... Delay Time Accuracy: 500ps A/D Converter: 8-bit resolution VOLTS/DIV Range: 2mV/div-5V/div at input BNC

Specifications and Product Details:

Model	DSO1202S	DSO1152S	DSO1102S	DSO1062S
Oscilloscope mode
Bandwidth	200MHz	150MHz	100MHz	60MHz
Real-time Sample Rate	1GSa/s
Equivalent Sample Rate	25GSa/s
Record Length(Sample Points)	Single-channel: Maximum 1M; Dual-channel:Maximum 512k
SEC/DIV Range	2nS/div-2000S/div (in a 2, 4, 8 sequence)
Delay Time Accuracy	500ps
Vertical
A/D Converter	8-bit resolution
VOLTS/DIV Range	2mV/div~5V/div at input BNC
Position Range	±50V(5V/div),±40V(2V/div~500mV/div),2V(200mV/div~50mV/div)±400mV(20mV/div~2mV/div)
Rise Time at BNC	≤1.7ns	≤2.3ns	≤3.5ns	≤5.8ns
DC Gain Accuracy	±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div ±3% for Sample or Average acquisition mode, 5V/div to 10mV/div
Trigger
Trigger Sensitivity (Edge Trigger Type)	DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full EXT(Typical) 200mV from DC to 40MHz EXT/5(Typical) 1V from DC to 40MHz AC: Attenuates signals below 10Hz HF Reject: Attenuates signals above 80kHz LF Reject: Attenuates signals below 150kHz Noise Reject: Reduces trigger sensitivity
Trigger Level Range	CH1,CH2: ±8 divisions from center of screen EXT: ±1.2V EXT/5: ±6V
Trigger Level Accuracy, typical (Accuracy is for signals having rise and fall times ≥20ns)	CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)
Holdoff Range	100ns-10s
Trigger Type
Edge	Trigger on the rising or falling edge
Pulse Width	Trigger (when >,<,=,≠) on positive or negative pulses Pulse Width Range: 20ns-10s
Video	Trigger on an NTSC, PAL, or SECAM standard video signal Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)
Slope	Trigger (when >,<,=,≠) on a positive or negative slope Set Time: 20ns–10s
Overtime	from the rising or falling edge Set Time: 20-10s
Alternate	Internal trigger on edge, pulse width, video or slope
Measurement
Cursors	Manual: The difference between voltage cursors V; the difference between time cursors T; 1/T calculated by Hz. Tracing: The voltage and time at a waveform point
Automatic	Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width
Meter Mode
Max.Resolution	6,000 Counts
DMM Testing Modes	Voltage, Current, Resistance, Capacitance,Diode & Continuity
Max. Input Voltage	AC: 600V, DC: 800V
Max. Input Current	AC: 10A, DC: 10A
Input Impedance	10 MΩ

Meter Mode
*Max.Resolution:6,000 Counts
*DMM Testing Modes:Voltage, Current, Resistance, Capacitance,Diode & Continuity
*Max. Input Voltage:AC: 600V, DC: 800V
*Max. Input Current:AC: 10A, DC: 10A
*Input Impedance:10 MΩ

Isolation
Max float voltage level
*The float voltage between BNC and Ground:600V CATIII, 1000V CAT II
*The float voltage between each Channel:600V CATIII, 1000V CAT II
*The float voltage between Multimeter and Ground:1000V
Max input Voltage level
*Between input Ports directly:400V CAT II
*Input by 10:1 probe:600V CATIII, 1000V CAT II
*The Max input voltage of Multimeter:DC 800V,AC 600V

Display
*Type:Right angle 5.6 16-digit color LCD
*Resolution:640*480 dots
*Contrast:16 gears, with the progress bar to show adjustment
Interface
*USB host and USB slave, Lan Optional
Power Supply
*Voltage:DC Input:12--17VDC, 2000mA
Mechanical
*Size:245 x 163 x 52 (mm)
*Weight:1.3KG (exclusive of packing and accessories)