DR series Digital Resistance Meter with auto judgement(0.01-100 Ohm) - DR

Resistance Meter, Input:either within 0.01-100 Ohm, Accuracy:0.3%, Auto inspection for qualified products in production line - more info check here: http://www.buymeasuringtools.com/DR-series-Digital-Resistance-Meter-with-auto-judgement-0-01-100-Ohm-10275326/

Quick Brief

Place of Origin: China Brand Name: Mypin Model Number: DR Display Type: Analogue and Digital Measuring Range: 0.01--100K(MΩ) Accuracy Class: 0.3% Operating Temperature: 0-50C Dimensions: 48*96*80mm Analog output: 0-10mA or 4-20mA Resistance Meter: Resistance Meter

Product Features:

Resistance Meter

Input:either within 0.01-100 Ohm

Accuracy:0.3%

Auto inspection for qualified products in production line

Business Terms:

Port: Shenzhen

Minimum Order Quantity: 5 Piece/Pieces

Supply Ability: 2000 Piece/Pieces per Month

Payment Terms: L/C,T/T,Western Union,Paypal

Contact Supplier

Specifications and Product Details:

DR series Digital Resistance Meter with auto judgement(0.01-100 Ohm)

The principle:

When the value of the inspected resistance (Rt for short)is between the setted high and low limit values under setted continious sampling times,then the inspected as a qualified products.Otherwise the meter will keep on inspection.When Rt is not between the setted high and low limit values under NCS times continoius sampling,then the inspected as a unqualified products.The relative relay will output..

Features

1, Input:0.01-400Ω,0--50KΩ,others set by user,elctronic Meg Ohm Meter 0-500M can be built when indicated, with NG OK or HI LO GO output control,OK means auto reset,NG means handly reset, high sampling speed, widely used in eletronical production line for control of auto inspection, simple to operate, and practical.

2, Signal input can select data or peak value holding fuction,20 segments non-linearity input, when input 0-5k RTD, it can act as electrical ruler.

3, Output:4 lines output,with various output mode selectable:UPPER/LOW or intevals,etc.

4, Isolate analogue output: 0-10mA or 4-20mA,with output range adjusted by software.

5, RS232 OR RS485 Modbus RTU protocol,connectable with various equipment,computer or PLC directly.

6, Dimemsions: DR4:48*48*80 DR6:48*96*80 DR8:96*48*80 DR7:72*72*100 DR9:96*96*100 DR10:160*80*70,case class:IP65.

7, Power supply:regular:80-265V AC/DC,others: 12--30V AC/DC indicate when ordering.

Main product:Panel Meter

Counter

Timer,Timer Relay

Temperature/Humidity Controller

Panel Meterr

Frequency / Tacho / Batch / Length /Linespeed Meter

Flow / Level /Pressure Controller

Proximity Switch

Photoelectrical Sensor

Sensor Controlle

Power Adjustor

They are widely used in industrial control and measurement field, such as machinery, electrical cabinet, power sub-station, industrial automation, etc..

Additonally,OEM service,Design service offer, Buyer lable offer.

Tel: 086-0760-23609691 Fax: 086-0760-23609692

Phone: 086-13217608016(Barbara Guo) 086-13435730867(Peter Liao)