Laser Diameter Gauge
1.High speed scanning at 1680 times/sec
2.Automatic mode,LED or LCD touch screen
3.7 digital display
Port: qingdao
Minimum Order Quantity: 1 Set/Sets Laser Diameter Gauge sample is available
Supply Ability: 100 Set/Sets per Day
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: boxes or wooden case
Delivery Detail: 7 days
DL Series Laser Diameter Gauge
Features:
High speed scanning at 1680 times/sec
High Accuracy
7 digital display
Automatic mode and manual mode selectable
Low limit, Max.- Min. limit alarm setting
Touch Screen
IP65 protection level provided
LED or LCD touch screen
Display mode | 7 digitals, LED ( mm) |
Beam scanning speed | 1680 times/sec. |
Measured dimensions | External diameter and seam(12 data can be measured simultaneously at most) |
Measuring modes | automatic and manual incl. key board trigger and external trigger, host control |
Measuring initial trigger | internal continuous trigger, keyboard trigger and external trigger Min. short circuit signal 30ms is required or a low level signal with collector open-circuit is supplied for external trigger |
Output | RS-232C optional for RS-485 |
Analog interface | Output is the difference between measure value and nominal value, with +10V -10V corresponding to +2mm -2mm |
Resolution ratio | 0.1 m 5mv/1 m |
Statistical calculation | average value, Maximum, Minimum, Max.-Min. from measurement start to measurement termination |
Tolerance setting | Normal 7 digitals at most mm Up-limit 7 digitals at most mm Low-limit 7 digitals at most mm Max-Min. 7 digitals at most mm Offset value 7 digitals at most mm |
Warning | overrun warning for Up and Low limits, and Mix.-Min |
Contactless switch | 1a 3 0.1A AC100V |
Measurement of transparent object | available |
Working Temperature | 0 45 35 85 RH dewless |
Power supply | AC85V 265V 50Hz/60Hz |
Power | 30W |
Weight | Control unit: 3kg sensor: 2kg DL190:6kg |
Dimensions | control unit: 310mm 240mm 85mm sensor: 420mm 110mm 35mm (DL190:500 178mm 40mm) |