DIN Type abrsion tester
Usage: Testing the quality of the wear and tear of lexible materials, rubber, tires, shoes, etc.
Port: Shenzhen
Minimum Order Quantity: 1 Set/Sets -Haida
Supply Ability: 70 Set/Sets per Month -Haida
Payment Terms: L/C,T/T,Western Union
Contact Supplier
Packaging Detail: Strong wooden case
Delivery Detail: 15 days after order confirmed
DIN Type abrasion tester
DIN Type abrasion tester applies to the abrasion test of resilient material,
rubber,tyre,transport belt,synthetic leather. It's effictive and esay to operate.
Specification:
| DIN type abrasor |
| Mode | HD-310 |
| Specimens size | 16mm, 6-15mm (D) |
| Fixture load | 2.5N |
| Weight load | 2.5N,5N |
| Fixture lateral displacement | 4.2mm/wheel each lap |
| wheel diameter | 150mm |
| wheel length | 460mm |
| wheel rotate speed | 40rpm |
| Travel reservations | 40m/20m |
| Abrasion speed | 0.32m/sec |
| Dip angle | 3°the angle of the specimen back shaft with vertical roller face |
Model No.: GD-509A
Features: It is suitable to determine the tendency of fuels (gasoline, coal oil, diesel oil) to form gum when used in the motor.
Model No.: GD-F02-20
Features: GD-F02-20 Automatic Mixture Blender is a bending instrument used to make sample of asphalt-sand mixture or cement-sand mixture.
Model No.: GD-510G-II
Features: It is suitable to determine solidifying point and cold filter plugging point of petroleum products.
Model No.: GD-510G-II
Features: It is suitable to determine solidifying point and cold filter plugging point of petroleum products.
Model No.: GD-510G-II
Features: GD-510G-II Condensation Point Tester can determine solidifying point and cold filter plugging point of petroleum products.
Model No.: GD-6532
Features: It's used to determine total amount of halides in the crude petroleum,reduced oil, cracked residue and fuel oil.
Model No.: GDC-1B, C
Features: The instrument is mainly used for borehole determination in mining, hydrology and borehole of concrete pile determination.
Model No.: GD-510D
Features: Pour and Cloud Point Tester:
Power: 1000W
double slots
four holes with same temperature
Model No.: GDE-1C
Features: GDE-1C Engler Viscosity Tester is used to determine the ratio obtained by dividing the flow time.
Model No.: GDE-1C
Features: GDE-1C Engler Viscosity Tester (Digital Display) is used to determine the ratio obtained by dividing the flow time.
Model No.: GD-510D
Features: It is suitable to determine pour point and cloud point of petroleum products as per ASTM D97, ASTM D2500, IP15, and IP219.
Model No.: GDE-1A
Features: GDE-1A Engler Viscometer (Digital Displays) is used to determine the ratio obtained by dividing the time of flow.