DEM481UC - DEM481UC

2) Have three tariffs, may select 4 time area, every time area can set 12 daily period, every time area has one rate, every rate can set

3) It has IC card with code and data against false, standard configuration use storage IC card, may select logic encryption card (Product

4) Standard configuration of the prepayment management system use of single edition, may select network edition. (Please specified

5) 7 digits LCD digits display cycle, we can set the cycle display, it can display 8data at most. Can select the data which displayed.
6) There are a clock and Maintenance-free backup lithium batteries in it, battery capacity real-time detection and display.
7) There is a port of far infrared, it is use for set and reading the meter and check the clock. Set and operation have password

8)It has load control and function of automatic fault detection and instructions, with function of open terminals cover and detection and

9)A port of pulse output passive closed (polarity), complying with standard IEC 62053-31 and standard DIN 43864.
10)Eight LED instructions power supply state, signal of energy impulse, the direction of the flow of load current, and the state rates just

11) Single direction three component measure three phase four wire active energy consumption. It is nothing with direction of the flow

12)Direct connect operation, type 16B wiring, may select three phase three wire, direct connect operation, type 13B wiring (Product

13)Front board three fixed installation, standard configuration short terminals cover, may select extension terminals cover, in order to protect to use safety. (Product Configuration code is UA). Configuration code is UD).
of load current. Complying with standard IEC 62053-21.
now.
open terminals cover and cut power.
protection, communication agreement complying with standard DL/T645-1997.
when ordering).
Configuration code is UG) or non-contact RF card. (Product Configuration code is UK)
three unit price.
programmer.