DEM313TL Front Board Mounted
Port: Shanghai or Ningbo
Minimum Order Quantity: 50 Piece/Pieces
Supply Ability: 10000 Piece/Pieces per Week
Payment Terms: L/C,Western Union,MoneyGram
Contact SupplierPackaging Detail: Export standard package
Delivery Detail: 20Days
Functions and features |
1. Front board three fixed installation, the cover is made of PC material which is transparent and anti-UV molded overall, the bottom and the terminal of the meter are made of black glass fiber which can fire-retardant and enhanced PC material, and the IP rating up to IP56. It has following features: good weatherability, anti-impact, good insulation performance, specious appearance, etc. 2. Standard configuration the bottom and the terminal of the meter are closed by the screw of the meter, may select the bottom and the terminal of the meter are closed by ultrasonic. (Please specified when ordering). 3. 5+1 digits display (99999.1kWh) by step motor type impulse register 4. Standard configuration one port of pulse output passive (polarity), May select increase a distant port of pulse output passive (nonpolarity). And contact with all kind of AMR system conveniently, Complying with standard IEC 62053-31 and DIN 43864. 5. Standard configuration only one LED instructions signal of energy impulse (red), may select add instructions power supply state (green) and automatic detection the direction of the flow of load current and instructions by LED (when display yellow, that is meaning the direction of the flow of load current reverse). Please specified when ordering. 6. Single direction single component measure single phase three wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21. 7. Direct connect operation, type 2A wiring. 8. Standard configuration extension terminals cover, in order to protect to use safety, may select short terminals cover. (Product Configuration code is TK). |
Technical parameters | ||||||||||||
|
Outer and mount dimension
Wiring diagram (Type 2A)
Terminal | Note |
1 | L1 inlet phase line |
3 | L2 inlet phase line |
4 | L2 outgoing phase line |
6 | L1 outgoing phase line |
2 and 5 | Port of pulse output passive |