DEM041DR SINGLE PHASE ELECTRONIC DIN-RAIL ACTIVE ENERGY METER
Port: Shanghai or Ningbo
Minimum Order Quantity: 50 Piece/Pieces
Supply Ability: 10000 Piece/Pieces per Week
Payment Terms: L/C,Western Union,MoneyGram
Contact SupplierPackaging Detail: Export standard package
Delivery Detail: 20Days
Functions and features |
1. 35mm standard DIN rail installation, complying with standard DIN EN50022. Or front board installed (mounting holes center distance 63 mm), users can choose any one by themselves. 2. Ten pole width (Modulus 12.5mm), complying with standard JB/T7121-1993. 3. Type S wiring (Inlet from bottom, outlet from top), use CT connect operation, may select 27 CT ratio, the meter will read directly after set, and needn’t multiplied by CT rate. 4. Have three tariffs, may select 12 daily period of times. You can set the date arbitrary which can automatic read the meter every month. May select single tariff function in weekend. (Please specified when ordering) 5. There are a clock and Maintenance-free backup lithium batteries in it. Battery capacity detection and display all the time. It can keep the electricity data for 12 months. The data can be kept forever after blackout. 6. May select cycle display (default) or push the button itemized display, we can set the cycle display, it can display 15 data at most. Can select the data which displayed. Data 5+2 digits(99999.91kWh, Only when CT ratio 5:5A) or 7 digits display. It is choose by the CT ratio which is set. 7. There are a polarity port of pulse output passive closed and a no polarity port of pulse output passive distant, the output rate is 10kWh / Pulse). Complying with standard IEC 62053-31 and DIN 43864. 8. There are far infrared and a port of RS485 communication data. It is use for setting and reading the meter. Set and operation have password protection, communication agreement complying with standard DL/T645-1997. 9. Nine LED instructions respectively power supply state, signal of energy impulse, the direction of the flow of load current, the tariff state just now and the data communications state. 10. Single direction two components measure three phase three wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21. 11. Standard configuration short terminals cover, may select extension terminals cover, in order to protect to use safety. (Product Configuration code is DS). |
Technical parameters
Model | Accuracy | Reference voltage (V) | Current specifications (A) | Starting current (A) | Insulation performance |
DEM041DR | Class 1 | 3 x 220 3 x 400 | CT/ 5A | 0.01 | AC voltage 4kV for 1 minute, 1.2/50us waveform impulse voltage 6kV |
Outer and mount dimension
Wiring diagram (Type S)
Terminal | Note |
L1 | L1 phase CT |
L2 | Don't use |
L3 | L3 phase CT |
(Inlet from bottom, outlet from top) | |
7 and 8 | Port of pulse output passive closed |
3 and 4 | Port of pulse output passive distant |
9 | L1 phase line |
11 | L2 phase line |
13 | L3 phase line |
N | Don't use |
5 and 6 | Port of RS485 data communication |