DEM024DA SINGLE PHASE ELECTRONIC DIN-RAIL ACTIVE ENERGY METER
Port: Shanghai or Ningbo
Minimum Order Quantity: 50 Piece/Pieces
Supply Ability: 10000 Piece/Pieces per Week
Payment Terms: L/C,Western Union,MoneyGram
Contact Supplier
Packaging Detail: Export standard package
Delivery Detail: 20Days
| Functions and features |
| 1. 35mm standard DIN rail installation, complying with standard DIN EN50022. 2. Four pole width (Modulus 17.5mm), complying with standard DIN43880. 3.Standard configuration 6+1 digits display (999999.1kWh) by step motor type impulse register. May select 5+1 digits display (99999.1kWh). 4. Standard configuration pulse output passive (polarity), May select distant impulse output passive (nonpolarity). And contact with all kind of AMR system conveniently, Complying with standard IEC 62053-31 and DIN 43864. 5. Three LED respectively instructions power supply state (phase voltage L1 & L3) and signal of energy impulse. 6. Automatic detection the direction of the flow of load current. And Instructions on individual LED 7. Single direction two components measure two phase three wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21. 8. Standard configuration type S wiring (Inlet from bottom, outlet from top) for direct connect operation, we can also choose another type of wiring, and use CT (Product Configuration code is CA) and PT & CT (Product Configuration code is BA) for operation. 9. Extension terminals cover, in order to protect to use safety. |
Technical parameters
| Model | Accuracy | Reference voltage (V) | Current specifications (A) | Starting current (A) | Insulation performance |
| DEM024DA | Class 1 | 3 x 127 3 x 230 | 5(100) | 0.02 | AC voltage 4kV for 1 minute, 1.2/50us waveform impulse voltage 6kV |
Outer and mount dimension
Wiring diagram (Type S)
| Terminal | Note |
| L1 | L1 phase line |
| L2 | L2 phase line |
| L3 | L3 phase line |
| N | Neutral line (Inlet from top, outlet from bottom) |
| 26 and 27 | Port of pulse output passive |
Model No.: DTS353
Features: This is three phase electricity meter, DIN rail mounted, with counter and LCD display.
Model No.: DTSF-353
Features: We produce three phase energy meter with eight tariff and four tarrif.
Model No.: DDS-353
Features: This is single phase digital kwh meter, digital kwh meter can be both single phase and three phase
Model No.: DTS-353
Features: Three phase DIN-RAIL energy meter,it has many choices of ratio settings. Electronic kWh meter with transparent case
Model No.: DTS353(ampere meter)
Features: Three phase multi- tariff energy ampere meter with double tariffs. It has also counter display.
Model No.: DTS-353
Features: This is three phase DIN-Rail multi-tariff power meter which in accordance with the IEC standard.
Model No.: DTSY353
Features: We design and produce single phase digital energy meter with a wide range of parameters
Model No.: DTS353
Features: This is three phase multi-tarrif energy DIN Rail meter wich control tariff by exterior controller.
Model No.: DTS353
Features: This is three phase electric kwh meter, with both counter and LCD display.
Model No.: DDS-1Y
Features: 4 tariff, 4 intervals and 3 seasons.Support communication: RS485, Infrared, GPRS/PLC. IP 54. Meter Events Log.
Model No.: DTS-353
Features: We produce three phase ampere energy meter for large qantity each month, this ampere meter enjoy low price.
Model No.: DDS-
Features: This single phase GSM energy meter is with remote reading through GSM module