1,DA 284 Pressure compensation Device
2,Stego pressure measuring devices
3,High degree of protection
4,Easy to install
Port: Ningbo or Shanghai
Minimum Order Quantity: 100 Piece/Pieces
Supply Ability: 10000 Piece/Pieces per Week
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: Stabdard Export Packing
Delivery Detail: Depends on quantity
DA 284 Pressure compensation Device
Pressure differentials in enclosures with a high degree of protection are a result of internal and external temperature changes. In the case of negative pressure or partical vacuum, dust and humidity can enter the enclosure through the door seal. When the air inside the enclosure cools down, condensation may occur because the humidity cannot escape the enclosure. The easy-to-install pressure compensation device DA 284 provides compensation of pressure at a protection degree of IP66. Even with a slight overpressure, a waterproof membrane inside the plug allows the humidity to escape whilst blocking water and dirt from entering the enclosure.
Mounting | thread M40 x 1.5 with nut |
Torque | 5Nm (max. 10Nm) |
Depth in enclosure | approx. 16mm |
Material | plastic, light grey |
Sealing | sealing gasket NBR |
Filter | waterproof membrane |
Air permeability | 1200l/h at a pressure difference of min. 70mbar |
Dimensions | Ø 60 x 37mm |
Fitting position | variable |
Operating / Storage temperature | -35 to +70°C (-31 to +158°F) |
Installation: Make cut-out +0.5mm in enclosure wall and mount pressure compensation device with nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure. For optimal pressure compensation we recommend to use two devices on opposite sides towards the top of the enclosure.