Concrete magnetic shaking table Concrete shaking table concrete vibrating table - HZJ-1

Concrete shaking table

The machine is solid tryout by a solenoid to a new generation product, the automatic power magnetic magnetic disappear after power failure, the test a best test equipment



Main technical parameters:

1, the specifications of 1000mm × 1000mm, 800mm × 800mm, 600mm x 800mm

2, the magnetic attraction of ≥ 200 kg

3, the amplitude of 0.3-0.6mm

4, voltage 380V

5, frequency 50HZ



Concrete shaking table

Concrete shaking table operating procedures

First, the preparatory work

Before the installation of a concrete shaking table to lay the foundation level of leveling of the earth plane according to the dozen bases, and chassis bolts, and then install, install the mounting bolts must be tightened.

Stop after the first 3-5 minutes by car, shaking table installed test to check for all fastening bolts, if loose to bear in before use.

Second, the test operation

Concrete vibrators, concrete products in the real process, should be firmly secured to the vibration table, the required vibration-kind products placed on the table relative to said load balancing.

Third, pay attention

A vibrator bearings should be regular checks and take apart and wash on a regular basis, to replace oil, the bearing lubrication is maintained.

2, shaking table should have a reliable ground wire, to ensure safety.

Concrete shaking table

Friendly Tips:

We garantee the product description is true and effective. After installation, for your safety, please use the instruments grounding.In the first year of your using the product, we replace the damaged parts.(Except consumables )

With decades of experience, we can provide a wide range of professional laboratory solutions. Please contact us if you can not find your desired lab equipment on our website. We will help you to find manufactures who can guarantee the quality.