Computer-type economic material testing machine
1.Max load 500N,1KN,2KN,5KN<option
2.Accurate grade 1/0.5
3.3 years warranty
Port: FOB yantian
Minimum Order Quantity: 1 Unit/Units
Supply Ability: 300 Unit/Units per Month
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram
Contact SupplierPackaging Detail: By wooden case
Delivery Detail: within 20 days after get 30% deposite
Computer-type economic material testing machine
Equipment summary:
HZ-1005B computer-type economic material testing machine(with displacement)combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control, This series of machine using single-space structure, operational space at the bottom, it is mainly applied to test non-metallic and metallic material which the load is less than 5kN, it has the parameters, such as stress, strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons, thread, spring, wood, medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor, the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation, testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curvers can be transferred out after the test, you can know the testing process through the testing curvers, or compare with others curves, or amplify the curvers.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
corresponding standard :
GB/T16491-1996 electronic universal testing machine
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested
Technical parameters:
model | HZ-1005B Computer-type economic material testing machine(with displacement) |
Maximum load | 500N,1KN,2KN,5KN<option |
Accurate grade | 1 grade/0.5 grade |
Effective measuring range | 0.2%~100%(1 grade)/0.4%~100%(0.5 grade) |
Measuring accuracy | Display the value ±1%/ Display the value ±0.5% |
Tester resolution | Max load 1/200000,constant the resolution |
Load sensor | Basic configuration:sensor(max load): one Extended configuration:can add more sensors |
The effective testing width | 400mm(can be increased the width according to customers requirement) |
Effective tensile space | 400,500,600mm(can be increased the height according to customer’s requirement) |
Range of testing speed | 0.001~500mm/min |
Accruacy of displacement measurement | Tolerance: ±0.5%/ tolerance: ±0.2% |
Deformation of measured system (according to the requirements ) | Min span :10mm,Max range of deformation :800mm Extended deformation : Min span: 25mm,50mm,100mm, range of deformation :5mm,10mm,25mm |
Accuracy of measured deformation | Tolerance :±0.5% (according to requirement of customer to choose the larger or small deformation) |
safety | Electronic-limit protection |
Testing platform moving device | Fast /slow two speeds to control,can jog |
Back to function of testing platform | Manual or automatic operation,After the test, the moving iron return to initial position with the highest speed by manual or automatic operation |
Overload protection | Overload 10%,automatic protection |
fixture | A set of tensile fixture |
Extension | Company can design and provide the fixtures according to the needs of customers, but the cost needs to add |
Machine size | 550×420×1800mm(lenght*width*height) |
Motor | Panasonic AC servo motor and drive |
Power supply | 220V,50HZ, |
power | 0.75KW(depending on different demand of force, using different motor) |
weight | (about)500 Kg |
Software features:
A. function of standard modular: provide users with the necessary applications to the test, covering GB, ASTM, DIN, JIS, BS ... and other testing standard specification.
B. tested product information: provide users with the data to set about the products, one time to input and re-use permanently . for improving the accuracy, the data can be corrected by the formula automatically.
C. Dual-Report Editor: provide users with the reported format that users choose (testing program add EXCEL reported format, Extend the previous single pattern of statements)
D. the datas unit of length and force can be exchanged, unit of force is T, Kg, N, KN, g, lb, unit of length is mm, cm, inch.