Computer Servo Building Materials Tensile Tester HZ-1003 - HZ-1003

Computer Servo Building Materials Tensile Tester

Equipment summary;

The Computer Servo Building Materials Tensile Tester is designed by mechanical-electrical integration, composition of the force-measuring sensor, transmitter, microprocessor, mechanism of load drive , computer and color inkjet printer. High-precision electronic motor can be set to five-speed, the components are connected by plug-way, Floor-standing models, it is taken account of modern industrial design and ergonomics in modeling and coating

It can be tested all the materials in stretch, compression, bending, shear, embedded relay, peeling, tearing, crack, etc,such as rubber, plastics, leather, metal, nylon wire, fabric, paper, aerospace, packaging, construction, petrochemical, electrical, vehicle, etc.

The implementation of standards and standard configuration

1. GB/T4689.20-1996 measuring fastness of leathers adhesion

2. QB/T2710-2005 measuring leathers expansion and the rate of elongation

3. QB/T2711-2005 measuring tear force of leather

4. QB/T2712-2005 measuring leathers strength and stretch of spherical crack test

Specifications

1.Computer Servo Type Universal Testing Machine

A. High-precision sensor 2KN from U.S.A. Accurate Forces within ± 0.5%.

B. High-precision 24 bits A / D, sampling frequency 200Hz

C. Power System: Panasonic AC Servo Motor + Driver + CAVEX + precision ball screw.

D. Control System: it is more precise using Pulse Command control modem, the range of controlling the speed is 0.01 ~ 250 mm / min.the board of iron can be adjusted to fast and slow by the control board. it is automatically saved after testing .

E. Data transmission: RS232 Transfer

F. Display: windows XP test software.

G. easy to control five speed and calibration system.

H. test software can precision control in position, speed, rate of load force and rate of stress, satisfy the different requirements of test.

I. Test space: Testing width is about 400 mm (standard), moving space of active iron 1000mm (excluding fixtures)

J. displacement: coder 2500 P / R, increase four-time accuracy. adopt Japanese Lejing coder that has strong anti-jamming capability, displacement resolution 0.001mm.

Small deformation: Metal extensometers, parsing 0.001mm.

K. Safe equipment : the system would shut down if overload or over-trip

2. software description about Computer Servo Type Universal Testing Machine

A. function of standard modular: provide users with the necessary applications to the test, covering GB, ASTM, DIN, JIS, BS ... and other test standard specification.

B. being test product information: provide users with the data to set about the product, one time to input and re-use permanently . for improving the accuracy, the data can be corrected by the formula automatically.

C. Dual-Report Editor: provide user with the reported format that user choose (testing program add EXCEL reported format, Extend the previous single pattern of statements)

D. length unit, force unit and showing the data can exchange, force unit T, Kg, N, KN, g, lb, unit of length mm, cm, inch.

E. auto-optimization of graphic scale, display the best measurment of graphics. It can test the exchange in graphics. It has the load - displacement, load - time, displacement - time, stress - strain load -2 points extending maps, and lots of graph compared.

F. Test results can be output in EXCEL format.

G. the result of test can be automatically preserved or manual preserved, test can automatically calculate the most strength, up and down yield strength, loop method, best method, non-proportional extended strength, tensile strength, compressive strength, tensile strength at any point, constant load extension, elastic modulus, rate of elongation, peel range of maximum, minimum, average, force, total energy, bending modulus, x% load in break displacement, load X% in break displacement, and so on . the test data can be stored in any disk.

H. Software has a capability that can output the before data.

3. The accessories about Computer Servo Type Universal Testing Machine

A. warranted book within one-year and operating instructions.

B. a group of fixture

C. testing software for tensile machine.

D. a set of brand computer, color printer

4. items can be tested about the Computer Servo Type Universal Testing Machine

Common items: ( display data and calculation )

tensile stress tensile strength

tensile strength rate of elongation at break

fixed stress rate of stress at break

stress strength tear strength

the value of force at any point rate of elongation at any point

pull-out strength force of adhesion and value of peak

5. main Technical parameters about Computer Servo Type Universal Testing Machine
A. Load cell: 5KN or 1ton, option
B. Resolution of force: 1/200000
C. Accuray of force: ≤0.5%
D Power magnification: 7 automatic switching

E. Displacement resolution : 1/1000
F. Accuracy of displacement : ≤0.5%
G. Resolution of extensometer : 1/1000
H. Accuracy of extensometer : ≤0.5%
I. Range of speed : From 0.01 to 250mm/min, (according to the needs of customer)
J. Effective displacement: 800mm (excluding fixture)
K. Testing width: 400mm

L. Power supply : 220V.
M. Power : 2KW
N. Machine size : about 120×75×180cm. (lenght ×width×height).
O. Machine weight : about 500 kg.