Common Pressure Meter - CXJ

CXJ Series Common Pressure Meter

Brief introduction

Common pressure meter series are suitable for measuring the pressure of liquid, gas and steam or vacuum, which are non-crystalloid and non-concretionary, and have no danger of explosion and do not erode steel and copper alloy.

Typical applicable locations are air compressor, vacuum pump, compressing air pipeline, pressure regulating valve, testing equipment, and medical sterilizer, etc.

Principal technical parameters

• Accuracy 1.6, 2.5 grades
• -40°C~70°C, relative humidity is not more than 85%
• Temperature influence
• When temperature departure is 20±5°C, additional
• temperature error is not 0.4%/10°C.

Model designations

Marking instance CXJZ-100ZT Production computer coding 1002054301

Axial front pressure vacuum meter. mounted form is axial dial mounted product computer coding, please see the“Guide for type

selection of common series instruments and meters”

Types and specifications

Specification explosion-proof window can release inner pressure caused by break of elastic component when over loaded, and thus security of personnel and establishment is ensured.

Configuration principle

The meter is composed of pressure leading system (including joint, spring tube, etc), gear wheel driving machine, indicator device (pointer and meter dial) and crust (including meter crust, meter cover, meter glass, etc).

Under the action of pressure and vacuum, spring tube will produce elastic deformation causing displacement at the end. The displacement is enlarged by mechanical driving device and transferred to indicator, and then the pointer of the meter dial, with measure unit on it, indicates the pressure value or vacuum value

Show method of the dial

Min value of pitch line

For customized special meter dial,clear notes shall be made on the order.

Ordering instructions

Ordering instructions The product computer code ,types, names, accuracy grades, and measuring ranges .must be clearly noted. In case of special requirements, technical requirements shall be clearly noted specifications on the back of the order on ordering goods.