Product Features:
Cold Bend Test Device
Business Terms:
Port: shenzhen
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 50 Set/Sets per Month 8 H/D
Payment Terms: L/C,T/T,Western Union,Cash
Contact Supplier
Cold Bend Test Device
Port: shenzhen
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 50 Set/Sets per Month 8 H/D
Payment Terms: L/C,T/T,Western Union,Cash
Contact Supplier
Packaging Detail: wooden case
Delivery Detail: 15 days after payment normally, special for the request
Cold Bend Test Device
This test is intended in general for cores of circular cross-section having an external diameter up to and including 12.5 mm and for sector-shaped cores when it is not possible to prepare dumb- bells.
The apparatus shall be held in a refrigerator before and during the test.
The diameter of the mandrel shall be between 4 and 5 times the diameter of the test piece (see below).
The mandrel shall be uniformly rotated at a rate of one revolution in about 5 s and the number of turns shall be as specified in the following table:
| Overall diameter (d) of the test piece (mm) | of turns Number |
| d:2.5 | 10 |
| d:(2.5-4.5) | 6 |
| d:(4.5-6.5) | 4 |
| d:(6.5-8.5) | 3 |
| d:more then 8.5 | 2 |
The actual diameter of each test piece shall be measured by either a vernier calliper or a measuring tape. For sector-shaped test pieces, the minor axis is taken as the parameter equivalent to the diameter for determining the mandrel diameter and the number of turns.
For flat cords, the mandrel diameter shall be based on the minor axis dimension of the test piece, which is wound on with its minor axis perpendicular to the mandrel.
Conforms To: IEC60811-1-4 clause 8.1
Model No.: KXO-1
Features: KXO-1 is the instrument for precision measurement displacement by obliquity,mainly used to monitor deep footing groove, ect
Model No.: HVP-275
Features: High Voltage Proximity Detector High bright LEDs visual
Sealed by " O" Ring.
Model No.: HVP-40M
Features: High Voltage probe Connect to any digital multimeter with
standard jacks measure up to 40K VDC
or peak AC or 28KV rms AC
Model No.: SYD-260
Features: SYD-260 Water Content Tester
Water Content Tester
Karl Fischer Method
determine water content
Model No.: LGSY series
Features: Economic Deadweight Pressure Vacuum Tester
vacuum tester
Function:Range piston gauge, Checked Digital piston gauge, precision
Model No.: diluent
Features: Ubbelohde Viscometer to test petrochemical product
Model No.: WA-100B
Features: WA-100B Hydraulic Universal Testing Machine w/digital Display
Max.Capacity:100kN
Measuring Range:0 - 100
Max.ram travel150mm
Model No.: LP-2811
Features: Loop Impedance Range L - E , L - N: 20/200/2000 Ohm (Auto-Range)
Loop Impedance Test Current : 12A at 230V/50Hz
Voltage Meas
Model No.: ML-200
Features: ML-200 Anchor Testing Apparatus
1.Working pressure: 200kN
2.Piston stroke: 80mm
3.Measuring range: 0 200kN
Model No.: LGSY series
Features: Economic Deadweight pressure gauge
vacuum tester
Function:Range piston gauge, Checked Digital piston gauge, precision
Model No.: EMF-701
Features: 1) Gauss meter
2) EMF Field Tester Model :EMF 701
3) 13 mm(0.5"), 3 1/2 digit LCD display
4) Range in guass:0.1m to 199
Model No.: HVP-275
Features: High Voltage Proximity Detector High bright LEDs visual
Sealed by " O" Ring.