2.High temperature:up to 280 centigrade
4.Low flow rate measurement
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 500 Set/Sets per Month
Payment Terms: T/TContact Supplier
Packaging Detail: Carton as per export standard..
Delivery Detail: Within 7 workdays.
The Clamp-on, non-contacting transducers are strapped to the outside of a pipe and are suitable for most installations where the pipe material supports the transmission of ultrasound.
1.Suitable to measure the flow of solids-bearing or aerated liquid within closed conduit
2.Automatically signal gain adjustment
3.Don't need to shut down the pipe .
4.Flow on when install the transducers.
6.4-20mA and totalizer pulse output
7.Accuracy: 2.0% Calibrated span
1.Measurable to fluid of very low flow rate, low to 0.10FPS (0.03M/S).
2.Non-invasive, Standard transducer fit to 1~160 inches (DN25~4064MM), Round-Hoop type, 1/2~2 inches available.
3.Standard temperature transducer :-40~+120 °C;
4.Magnetic force mounting type transducers also is available.
5.High temperature transducer :-40~+280 °C