Checking tool for Fuel Pump
1.Voltage:380V, 50/60HZ
2.Output Power:11kw
3.Weight: 750kg.
4 2100*700*1470mm
Port: Qingdao
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 10 Set/Sets per Week
Payment Terms: L/C,T/T,Western Union,MoneyGram
Contact Supplier
Packaging Detail: Wooden case fit for delivery.length:2100mm width:700mm height:1470mm
Delivery Detail: About 5 days after receiving payment.
Checking Tool for Fuel Pump
| Power | 11KW/15KW |
| Speed Range | stepless frequency conversion, multi-gear speed overhead, speed :50-400 circle/min or at will |
| Number of station can be debugged | 12 |
| Fuel supply | 0-0.4MPa(low pressure) 0-4MPa(high pressure) |
| Overall dimension | length:2100mm width:700mm height:1470mm |
| Net weight | 1000kg |
Function | debugging the uniformity and quantity of the oil supply of each cylinder in injector pump |
| debugging the test point and interval angle of oil supply of injector pump | |
| debugging the performance of different speed governor | |
| checking the tightness of injector pump | |
| Testing the quantity of oil return of distribution pump | |
| checking pressure compensator of distribution pump | |
| measuring the pressure of pump chamber | |
| measuring the advance angel | |
| measuring the travel of gear lever |
FUNCTION
1. Adjusting each cylinder delivery at any speed.
2. Adjusting point and interval angle of oil supply of injection pump.
3. Adjusting the performance of different mechanical governor.
4. Checking of the sealing of injection pump.
5. Testing of oil return of distributing pump.
6. Checking of the pressure compensatory device of distributor pump.
7. Measuring of the internal pressure of distributor pump.
8. Measurimg of the advance angle.
9. Measuring the travel meters of gear lever.
Model No.: 824A
Features: designed to determine the friction characteristics of materials. Primarily by pulling one surface over another
Model No.:
Features: 1.High quality with competitive price
2.Best service
3.Prompte delivery
Model No.: SML-868TS
Features: Lan cable scanning tester
1.to check various circuit status.
2.to search the cable wanted.
Model No.: COME3010
Features: negative ion tester,energy tester,quantum tester
1.MOQ:1pcs
2.the machine for the ion testing...
Power: for the energy ion
Model No.: HEUI
Features: HEUI test bench is designed to test up to four HEUI injectors,is the latest advance test bench.
Model No.: JS-QC
Features: The paper tube pressure measure machine serves to measure the resistance of a tube to crushing.
Model No.: HT-225V
Features: Voice Digital Test Hammer
Data storage: 200*99*16=316800 testing results,
20 special test strength curves
lithium battery
Model No.:
Features: Roped Scrape ink stick,Special for coating very soft material such as paper, cardboard, testing paper card, textiles and leather
Model No.: BTS 5V-3A
Features: 1)5V/3A type
2) constant-voltage source
3)each channel can program and test independently.
Model No.: SY
Features: 1-Fully automatic testing Dielectric strength and breakdown voltage of transformer oils;
2-Built in printer;
3-IEC, ASTMD rule
Model No.:
Features: Cable Tester and Crimping tool supplier
For rj11 and rj45
Model No.: ZLT-I02
Features: Conform to IEC61032,IEC950,UL1278 ,IEC60335.1
zhilitong products, good quality with good price, also with good service.