Product Features:
Non-Contact Eccentricity Measurement System
Business Terms:
Minimum Order Quantity: 1 Unit/Units
Supply Ability: 100 Unit/Units per Month
Payment Terms: T/T
Contact Supplier
Non-Contact Eccentricity Measurement System
Minimum Order Quantity: 1 Unit/Units
Supply Ability: 100 Unit/Units per Month
Payment Terms: T/T
Contact Supplier
Install CenterScan at a wider range of production line locations to reliably monitor the diameter of insulated wire and cable, and eccentricity of conductors, during extrusion and insulation processes. Robust electronics with superior immunity to noise allows you to locate the gauge closer to other line devices to deliver the most accurate measurements.
CenterScan 2010 is factory calibrated and requires no special adjustments or setups to get your wire or cable properly centered and ready to run. Requires no servo or mechanical tracking system or special guide rollers to keep your product centered. And, it is less sensitive to wire or cable position allowing your product to be set within a 6 mm (.24 in) window.
Specially-engineered, optical and inductive technology lets you perform ultra-accurate, low-drift measurements and accurate product positioning. Use the DataPro 5000 to monitor and control product and process-critical information including wire and cable position, diameter, eccentricity, ovality, and wall thickness.
Model No.: Nova - Strobe dbx
Features: Portable Stroboscope: Internal rechargeable batteries or AC powered models.Weighs less than 2.0 Lbs. for easy handling.
Model No.: GT Series
Features: GT Series Gloss Meter
Model No.: ST5900
Features: ST5900 Ultrasonic Thickness Gauge
Model No.: HP-10
Features: Torque Testing equipment fixture measured by other products,such as cork's tightness,experimental destruction of small parts,etc
Model No.: HP-10
Features: Torque Testing equipment fixture measured by other products,such as cork's tightness,experimental destruction of small parts,etc
Model No.: YF-2515F
Features: Measuring Machine Tools
1.Japan SONY color CCD
2.Travel:250X150X50mm
3.Resolution:0.0005mm
4.Accuracy:0.003mm
Model No.: VMS-3020T
Features: Alignment Test Machine Of Plastic Enclosure
1.Travel:300x200x150mm
2.Accuracy:3um
3.British Renishaw probe
4.Specialty fac
Model No.: LSG-1800
Features: 1. Meets requirements of IEC,CIE and LM-79
2. Measure photometric parameters of Lamps
Model No.: RLB(DN15)
Features: 1.Measure heat power passed through pipes
2.No mechanic gears
3.Anti-corrosive and anti-attack
4.Professional manufacturer
Model No.: BM100
Features: TLD-BM100 drive shaft balancing machine
1.380v 50hz 3ph
2.motor tools 2.2/3kw
3.transmission max length 2400mm
Model No.: BM200
Features: TLD-BM200 YYQ dynamic balancing machine
1.belt drive balancing machine
2.motor and inverter for speed regulation
Model No.: SA40
Features: SA40 Thickness Gauge