The humidifier is applicable for the sample curing to the large batches of the concrete, cement products etc.
Port: Ningbo or Shanghai
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 200 Set/Sets per Month
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: wooden case
Delivery Detail: 7 days
1. Summary
The "Cement curing room, concrete curing room, curing apparatus (Spraying type)" is applicable for the sample curing to the large batches of the concrete, cement products etc. It integrates the refrigeration, heating and humidification into a whole. It has the advantages such as quick refrigeration and heating, balanced humidification and heating, long service life and so on.
2. Structure
"Cement curing room, concrete curing room, curing apparatus (Spraying type)" is composed of main frame and accessories. The main frame is composed of refrigeration meter, heating meter, atomization meter, humidifier, temperature-humidity meter, control meter, and so on. Accessories is including water back cylinder (including water back pipe), water inlet pipe, water outlet pipe, temperature sensor, humidity sensor, additional air-condition connecting fits, nozzle, and other fits for installation.
3. Work priciple
The sensor installed in the curing room detects the temperature and humidity in the curing room and send the signal to the micro-processor in the main frame real-timely. When the temperature or humidity over the curing request, the micro-processor will send out signal and transmit to the relative device. The working medium will be sent to the nozzle. The medium will be atomizated and jet out. It will heat exchange with the air in the curing room until reach to the requested temperature and humidity. When the sensor detects that the humidity and temperature reach to the request, the controller will send out signal to stop the relative device working. Recycle to control the temperature and humidity in the room under request constantly.
4. Main technical parameters
(1) Temperature control range: 20°C±2°C
(2) Setting temperature: 20±1.5°C
(3) Temperature control accuracy: ±1.5°C
(4) Humidity control range: ≥90% (relative humidity)
(5) Setting humidity: ≥95%
(6) Humidity control accuracy: 2%
(7) Heating power: ≤6KW
(8) Refrigeration power: ≤2.7KW
(9) Humidity power: ≤200W
(10) Max. power: ≤8.0KW
(11) Voltage: 380±10% V
(12) Frequency: 50±1Hz
(13) Control type: automatic
(14) Working medium: clean water
(15) Suitable volume: ≤70m3
(16) Particle diameter: ≤5um (95%)
(17) Heating temperature error: ≥25°C (standard environment)
(18) Refrigerating temperature error: ≥20°C (standard environment)
(19) Outline dimension: 560×370×430mm (controller)
1420×980×1290mm (main frame)
(20) It should adopt 5P air-condition for your customer’s curing room