Specifications and Product Details:

Application:

Accurate (10-30 cm) localization of the pipe or cable path,
Accurate digital measurement of cable/pipe depth (up to 10 meters).
Tracing of loaded and dead cables
Measurement of a current in discovered loaded cables.
Survey areas before ground-work beginning
Pin point cable faults like: short circuit and cable breakage.

The kit consists of:

Receiver AP-017, transmitter AG-120, inductive antenna

IEM -301.2, transmitting clamp (optional equipment)

Transmitter features:

Easy to operate and does not require skilled staff.
Automatic matching with load in wide ranges of resistances.
Possibility of power selection depending on the specified matters.
Automatic repeated matching after power changing.
Long period of continuous operation from internal accumulator.

Receiver Features:

1. Easy-to-use operation and does not require skilled staff

2. Can be operated in insufficient lighting condition (bright LED indicator)

3. Output value of the bedding depth on the LED indicator, the definition of deviation from the buried utility axis on the LED display and with sound signal, determination of the buried utility type.

4. The case of the device is made of high-strength dyed plastic, which is resistant to atmospheric influences in wide ranges of temperatures from minus 30 to plus 60. It is admitted to use the receiver semi-submerged into freshwater.

5. Can be operated in winter conditions up to minus 30.