CRS300 can be installed on any injection pump test bench to work.
Port: QINGDAO
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 5000 Set/Sets per Year
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: PLYWOOD CASE
Delivery Detail: 12 days
CRS300 COMMON RAIL TESTER
The function of the CRS300 common rail tester is to produce driving signal for the CR high pressure pumps to drive the solenoid in the pump being tested, CRS300 common rail tester can be used to test the following pumps: BOSCH CP1, CP2, CP3, DELPHI, SIEMENS, DENSO HP2 AND HP3. It has the function to test the Electromagnetic injectors.
CRS300 can be installed on any injection pump test bench to work.
Design Features
1. Modulated driving signal to ensure the safety of the solenoid of the CR pump
2. Adjustable duty cycle for the driving signal
3. Short circuit protection for the output circuitry of the solenoid driving signal
4. Measure and LCD display rail pressure
5. To test if the CR injector is still function, To connect a CR injector to a high pressure fuel source by a high pressure fuel line and to the CR tester by harness. The tester is set to continuous injection mode. The CR injector is in normal condition, if it is capable to inject fuel under the driving signals by the tester.
6. To test injector spray atomization, To connect a CR injector to a high pressure fuel source by a high pressure fuel line and to the CR tester by harness. The tester is set to single injection mode to allow observing the nozzle spray pattern to judge if the nozzle is normal or not.
7. Checking the Injectors return oil and injection oil.