CRS-200B CR injector tester - CRS-200B

CR injector tester

CRS-200B test bench is our latest special device to test the performance of high-pressure common rail injector. It can test common rail injector of BOSCH, SIEMENS, DELPHI, DENSO. Advanced technology, steady performance, precise measurement and convenient operation.

>>>CHARACTERISTIC

1. Main motor drive adopts changing speed by changing frequency.

2. Windows operating system, friendly and clear operation image.

3. Oil quantity is measured by sensor and displayed on 19^''LCD screen;

4. Pulse and frequency of the injector drive signal can be adjusted.

5. Injection time can be setted.

6. Rail pressure can be tested in real time, it contains the high-pressure protection function.

7. Protection function of short-circuit.

8. Data can be searched, saved and printed.

9. Oil temperature is controlled by forced-cooling system.

10. Plexiglass protective door, easy operation, safe protection.

>>>FUNCTION

1.Test injector brands:BOSCH, SIEMENS, DELPHI, DENSO.

2. Clean 4 pieces of injector at the same time.

3. Test the seal performance of common rail injector.

4. Test the pre-injection oil quantity of common rail injector.

5. Test the max. oil quantity of common rail injector.

6. Test the cranking oil quantity of common rail injector.

7.Test the average oil quantity of common rail injector.

8. Test the backflow oil quantity of common rail injector.

8. Set the injection state and oil quantity measurement of common rail injector.

>>>TECHNICAL PARAMETER

1. Pulse width: 0.1~20ms

2. Continuous injection times: 0~1000

3. Fuel temperature: 40±2°C

4. Rail high pressure: 0~1600 bar

5. Test oil filtered precision: 5μ

6. Input power: 380V/50hz/3phase or 220V/60hz/3phase

7. Rotation speed: 0~3000RPM

8. Oil tank capacity:20L

9. Overall dimension(MM): 1180×770×1510

10. Weight: 300KG.