diesel pump tester
test common rail pump and injector of BOSCH, SIEMENS, DENSO and DELPHI.
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 30 Set/Sets per Month
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: Plywood case
Delivery Detail: 15 days
diesel pump tester
CR-200 test bench is our latest indepentent researched special device to test the performance of high-pressure common rail pump and injector, it can be mounted on the traditional test bench,it adopts the BOSCH original common rail pump to provide 0~2000 bar of rail pressure, it can test common rail pump and injector of BOSCH, SIEMENS, DELPHI, DENSO. Advanced technology, steady performance and convenient operation.
>>>CHARACTERISTIC
1. It can be mounted on the traditional test bench.
2. It is installed BOSCH common rail pump to provide 0~2000 bar of rail pressure.
3. Drive signal can be controlled.
4. Protection function of short-circuit.
5. Rail pressure can be tested in real time, it contains the high-pressure protection function.
6. Pulse and frequency of the injector drive signal can be adjusted.
7. Injection time can be setted.
8. Four high-brightness digital data display.
>>>FUNCTION
Common Rail Injector | Common Rail Pump |
1. Test brands: BOSCH, SIEMENS, DELPHI, DENSO. | 1. Test brands: BOSCH, SIEMENS, DELPHI, DENSO. |
2. Test six pieces of injectors at a time. | 2. Test the sealing of common rail pump. |
3. Test the max. oil quantity of high-pressure common rail injector. | 3. Test the internal pressure of common rail pump. |
4. Test the cranking oil quantity of high-pressure common rail injector. | 4. Test the proportional electromagnetic valve of common rail pump. |
5. Test the backflow oil quantity of high-pressure common rail injector. | 5. Test the input pressure of common rail pump. |
6. Test the average oil quantity of high-pressure common rail injector. | 6. Test the flux of common rail pump. |
7. Set the high-pressure common rail injector's injection state and oil quantity measurement. | 7. Measure the rail pressure in real time. |
>>>TECHNICAL PARAMETER
Injection testing frequency | 50~3000 rpm |
Pulse width | 0.1~200 ms |
Continuous injection times | 0~1000 |
Fuel temperature | 40±2degree |
Rail high pressure | 0~2000 bar |
Test oil filtered precision | 5μ |
Input power | 220v/50hz |
Weight | 500 kg. |