CONscan20 Conductivity Meter - CONscan20

CONscan20 conductivity meter used for measuring the electrical conductivity of low conductivity solutions, e.g. pure water. The meter without temperature compensation function.

Platinum Electrode:
CONscan20 meter use a standard platinum sensor for a fast and reliable measurement. Replaceable sensor design facilitates

maintenance.

Single Point Calibration:
The meter allows user to use the customized calibration solution. You need sets the known conductivity value on the meter,

immerses the electrode into standard calibration solution and presses the CAL key and the meter is automatically calibrated.

Hold Function:
During the measurement, hold function can momentarily freeze the reading on the display for easy viewing and recording.

Auto-Power Off:
The meter will automatically power down 8 minutes after the last key press. This function is helpful to save battery. It can also be turned off manually.

Waterproof Feature:
O-ring seals on the screw-tight battery and sensor compartments prevent water damage even if fully immersed. The unit also

floats.

Specifications:
Conductivity Range: 0.0 to 199.9uS/cm
Resolution: 0.1uS/cm
Conductivity Accuracy: ±1% F.S
Calibration Points: 1 point
Calibration Solution: 100 to 170uS/cm
Temperature Coefficient: 2% per °C, fixed
Auto-Power Off: 8 minutes after last key pressed
Normalization Temperature: 25°C, fixed
Operating Temperature: 0 to 60°C

Power Requirements: 3×1.5V alkaline batteries
Battery Life: Approx.150 hours
Dimensions: 180(L)×30(Dia.)mm
Weight: 85g

Meter Included:
Batteries
Optional Accessory: Carrying Case