CO2 Controller for Greenhouses F2000IAQ-CO2-3003D

Specifications and Product Details:

Gas detected	Carbon Dioxide (CO₂)
Sensing element	Non-Dispersive Infrared Detector (NDIR)
Temperature sensor	NTC
Humidity sensor	HS series capacitive sensor
Temperature dependence	0.2% FS/°C
Temperature correction	Self compensation
Power supply	220VAC or 110VAC or 24VAC, 50/60HZ±10%, selectable in order
Consumption	3.5 W max. ; 2.5 W avg.
Accuracy@25°C(77°F)	±40ppm + 3% of reading
Stability	<2% of FS over life of sensor (15 yr typical)
Calibration interval	ABC Logic Self Calibration Algorithm
Non linearity	<1% of FS
Pressure dependence	0.13% of reading per mm Hg
Altitude calibration	Programmable from 0-9,900m in 100m increments
Response Time	<2 minutes for 90% step change
Signal update	Every 2 seconds
Warm up time	2 hours (first time) 2 minutes (operation)
CO₂measuring range	0~2,000ppm (default) 0~20,000ppm 0~50,000ppm
CO₂setting & Display resolution	1ppm
Temperature measuring range	0~50°C(32~122°F)
Temperature setting range	5~45°C(41~113°F)
Humidity measuring range	0~99%RH
Humidity setting range	5~95%RH
Output resolution	10Bit
Relay output	Three ways dry contact outputs with programmable selection to control CO₂,temperature,humidity Rated switching current: 2A(220VAC/30VDC), resistance load
Communication interface	RS-485, 9600/14400/19200(default)/28800 or 38400bps (programmable selection), 15KV antistatic protection, 3 independent base address, max network node 64.
Flow rates	80 ~ 120 cc/min
Operation conditions	0~50°C(32~122°F); 0~95%RH, non condensing
Storage conditions	-40~70°C(-40~158°F)
NDIR life time	15 years
Weight	360g
Dimensions	130mm×90mm×40mm
Installment standard	65mm×65mm or 2”×4”wire box
Interface connections	9 terminals
Wiring standard	Wire section area<1.5mm²
Approval Standard	CE-Approval
Programming and selection	Via internal jumper and external push-buttons

1 Especially designed for agriculture equipments such as greenhouses, food and vegetable storages. Real-time detecting CO2 level, temperature and humidity with the local programmable control.

2 Wall mounting, LCD display

3 Carbon dioxide sensor, temperature sensor and humidity sensor are internal. The three values can be apart set.

4 Non-Dispersive Infrared Detector (NDIR) CO2 sensor, 15 years lifetime, CO2 setting range is selectable: 0~2000ppm / 0~20000ppm / 0~50000ppm

5 Special ABC Logic with patented Self Calibration Algorithm makes the CO2 sensor used up to 15 years

6 Temperature setting range: 5~45C

Humidity setting range: 5~95%RH

7 Provid three relays outputs to control a CO2 generator, a temperature device and a humidity devise or a ventilator.

8 Special photosensitive sensor detection can make the working mode of the CO2 generator changeover automatically in day and night.

9 Provide brightness adjustment range to make day/night limit setting by end users.

10 RS-485 communication interface with 15KV antistatic protection makes the controller being connected with PC (option)

11 Multiple functions, high performance, low price, make it praiseworthily.