1.220v50Hz(can customize others)2.Capacity 5000ml 3.280-280mm hating area4.brushless DC motor,stable performance5.anti-corrosion
Port: Shanghai
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 20 Set/Sets per Day
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: carton
Delivery Detail: within 10 days
CJB-S digital display magnetic mixer
Product features
1.Single stirring magnetic stirrer.
2.accurately digital display the speed.
3.Patented newest product ,adopts square 304 ss aluminum stainless steel anti-corrosion plate, can place heating mantle or water bath kettle to heat and stir.
4.Using brushless DC motor , with stable performance ,low noise ,long service life , no spark .
5.The shell adopts one-time forming flame retardant strengthen PBT injection moulding shell, with thermostability,anti-corrosion and good insulation property.
6.30°cant control panel is suitable for standing and sitting viewing angle
7.Stepless speed adjustment,low speed-stable , high speed-strong
usage
1.Fix the lever in the screw hole at the back and above of the instrument(attention :clockwise and counterclockwise ),adjust the hight of the cross clip then fasten the reaction bulb with the universal clip .Put the suitable stirring pebble into the container,connect to the 220v power supply,then turn on the power switch.
2.Adjust the “stir”knob clockwisely , make it in a right place according to speed showed to carry out stirring .
3.If the capacity is large or the solution is thick , you can increase the Stirring strength by adjust the knob .
4.If the phenomenon of jumping seed occurs , please turn off the stirring first and start slowly .
technical parameter
1.Power supply : ~220∨,50Hz
2.Range of speed adjustment : 50-1800 rotation /minute
3.Power : 40W,DC18V
4.Capacity of stirring : ≤5000ml
5.area of heating plate :140*140,180*180,230*230,280*280mm
6.Working time :continuous
7.Fuse pipe : ø 5×20 15A
attention
1.Environmental temperature : 0-50°C without any corrosive air .
2.Relative humidity : 35%-85% no condensation
3.Over load is not allowed .
4.Instrument should be earthed well .
5.Long time no use ,please keep it clean and reserve it in a dry and without any corrosion air place .
When there is some change and difference about the specification which is caused by products or products reform related to the specification , pardon that we won’t inform you.