XGJ-10A Series
Hydrostatic Pressure Tester
Introduction
The tester is mainly used to determine the resistance of thermoplastics pipes or short-time hydraulic burst to constant internal water pressure at constant temperature. It is applicable to thermoplastics pipes intended for the conveyance of fluids.
Standards:
It conforms to ISO 1167, EN921 and the equivalent.
Excellence
Function
It has the function of leakage alarm, recognizing cracking, supervising in real time, remaining voltage after breaking off, self recovery while powered on.
Pressure control system
The operation takes place over user-friendly, menu-prompted 8.4 touch screen and the embedded WIN CE operating system, which is capable of acquiring test data, printing them as a test report in a user-definable format and enable to process, evaluate, record and file the entire data sets.
All stations run automatically and are fully independent of each other, each working at a different pressure. Also offers suitable solution for large diameter pipes. It works with the highest pressure accurate and within the smallest pressure tolerance ranges.
Test tank
Insulated stainless Steel lid with pneumatic operation. Inner and outer of the test bank made of stainless steel; automatic water level control; double insulation; Several sample suspension rails provided; fast access to maintenance; integrated overheating protection; monitor of water circulation.
Configuration
1.Pressure control system;
2.Pressure supply system;
3.Test tank and temperature control system;
4.End closures: Φ10Φ16Φ20Φ25Φ32Φ40Φ50Φ63Φ75Φ90Φ110Φ125Φ140Φ160Φ180Φ200Φ225Φ250Φ280Φ315Φ355Φ400 Φ450Φ500Φ560 and Φ630mm. Other standard and diameter may be made according to customers requirement.
Specifications:
Pressure: | 0-10MPa or 0-16MPa |
Pressure controlling Accuracy: | +2% -1% |
Display Accuracy of the Pressure: | 0.001MPa; |
The Temp. Range of the test tank | ambient temp. 95 or 15 95 with a chilling system |
The Temperature Controlling Accuracy of test tank : | ±1 |
The Working Time of the Timer; | 0-9999h; |
The Interface of Pressure: | 20 (can be chose from 1to20 as you need) |
Enclosure | It is suitable for Φ16 to Φ630mm pipes and fittings; |