Brake Motor Balancer Machine
Large application&measure range
High initial unbalance permitted
High precision&efficiency
Port: Shanghai
Minimum Order Quantity: 1 Set/Sets with no discount
Supply Ability: 1000 Set/Sets per Month negotiation
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: Fumigated Wood Box
Delivery Detail: We will send it within 7 days after comfirm the order
Brake Motor Balancer Machine:
This balancer machine is widely used in balancing rotatable bodies, such as kinds of good-sized and medium-sized motors, textile machinery, fans,shaft, etc .. Driven by belt,it is simple to load and unload,quick to start and with high precision and low failure rate.
| Specifications | Parameters |
| Max Mass of Workpiece (kg) | 1.6 |
| Max Diameter of Workpiece (mm) | 260 |
| Distance between Two Support Bearings (mm) | 15-400 |
| Journal Diameter Scope of Workpiece (mm) | 3~40 |
| Diameter Scope of Driving Belt (mm) | 20~85 |
| Rotation Speed when the Diameter of Driving Belt is 100mm (r/min) | 500/650/1000/1340 |
| Motor Power (kw) | 0.12 |
| Min Achievable Residual Unbalance Amount (emar) | 0.3g· mm/kg |
Model No.: HW-10000
Features: Fan balancing machine(HW-10000)
1,high precision
2,high quality
3,high efficiency
4,low failure rate
Model No.: HDB-250
Features: Drive shaft balancing machine,testing machine(HDB-250)
1,high precision
2,high quality
3,high efficiency
4,low failure rate
Model No.: STQJ-2
Features: Standard 2.5Kgs 4Inch Soil Proctor CBR Compactor
Model No.: HLD-16
Features: Motor balancing machine(HLD-16)1,high precision
2,high quality
3,high efficiency
4,low failure rate
5,wide application range
Model No.:
Features:
Model No.: HLD-45
Features: balancing machine(HLD-45)1,high precision
2,high quality
3,high efficiency
4,low failure rate
5,wide application range
Model No.:
Features: Coatings Fast Dispersing Tester
Model No.: F-Series
Features: 1.High measurement precision
2.Simple manipulation
3.Shorten the design and development time
4.Improve efficiency
5.Costdown
Model No.: HP-10
Features: Peak measurement range 0.015 ~ 1.000(N.m);
0.15 ~ 9.00 (lbf.in);0.15 ~ 10.00 (kgf.cm)
Model No.: HDV-5K
Features: force gauge,tension calibration Force Gauge,electronic dynamometer,load cell, force tester,dynatension, electric force stand
Model No.:
Features: Leeb G type block
(460-540)HLG
(550-630)HLG
Model No.: V-lane
Features: vehicle testing lane