Box Compression Tester

APPLICATIONS

Corrugated board boxes and Cartons, Plastic Packaging, Wooden box

STANDARDS

Meets ISO2872,ISO2874,GB/T4857.3,GB/T4857.4

SPECIFICATIONS

1,Power: AC 220V 5A 50HZ

2,Measuring range: 0 ~ 10kN

3,Indication error: ±1%

4,Plate Size: 500 mm X 500 mm or 600 mm X 600 mm

5,MAX stroke: 500mm or 600 mm

6,Pressing Speed: 10 mm/min

7,Return velocity: 150 mm/min(maximum)

8,Display: LCD Display Module, Show Pressure Curve real-time

9,Printer: direct thermal printer, high speed while noiseless.

10,Communication Output: standard RS-232 interface

FEATURES

1,Strength test

Strength test which belongs to a destructive test is mainly used to measure the deformation when the sample is loaded with maximum pressure or crushing strength.

2,Constant Value Test

There are two parameters which are to be set in the constant value test: load force value and deformation value. The user can set one or both of them according to the practical requirement; the measure is complete when any parameter reaches the set value.

3,Stacking Test

Stacking Test is used to check up that whether the sample can endure a constant pressure in a given time period. Set up two parameters: compressive strength and testing time (hour).when the test starts, the system will check the current pressure at any moment to ensure the set value; the measure is complete when the test time is expired or the deformation value exceeds the set one within testing time.

4,The overall system is in good parallelism, stationarity and high return speed.