Bicycle Tires tensile testing machine (HZ-1002) - HZ-1002A

Bicycle Tires tensile testing machine

Equipment discription:

HZ-1002-60 Bicycle Tires tensile test bench at the next fuel tank mounted by the host, can be raw material testing, material testing, processing conditions, tests, manufactures semi-finished products testing, structure testing tension, compression, fatigue, bending,bending, adhesive force, connectivity, high and low temperature properties of test, tear strip test, break test, shear test and so on.Test material includes metal, nonmetal, and most other materials.

Corresponding standard :

Test operations and data processing line with GB228-2002 "Metallic materials Tensile testing method at room temperature"requirements.

Applicable industry:

Test operations and data processing line with GB228-2002 "Metallic materials Tensile testing method at room temperature"requirements.

Machine structure:

1. Host
The oil cylinder mounted under the host space is at the top of the stretch, compression, bending test space is at the top of the table under the beams and between.

2. Transmission
Down under the crossbar by the gear motor, chain drive mechanism, Ball Screw drive, to achieve tensile, compression of space to adjust

3. Hydraulic system
Hydraulic principles as shown, for the load adaptive speed control system into the oil throttle, manual valve control test process.
Hydraulic oil tank high-pressure gear pump driven by the motor into the circuit, through one-way valve, 10μ high-pressure filter, pressure valve, valve delivery into the fuel tank. Manual control valve to send the oil through the size of the opening to control the flow into the tank to meet the load requirements. After the test, open the oil return valve cylinder unloading and to return. Upper and lower jaw of the clamping, release through two solenoid valve control.

4. Screen display and software system

a.with the test force, force, peak, sample deformation, piston displacement, the screen display the test curve.

b.can GB228-2002 "Metallic materials Tensile testing method at room temperature"in the data processing
required to complete testing.

c.The original record the value of the test, reporting the value of the requirements of the standard GB228 rounding.

d.The loading rate can be manually controlled through the test force - time curve display.

e.metal tensile test can be automatically strike Fm, Rel, Reh, Rp, Rt, Agt, Z, A, Rm and other parameters, but also
on Fel, Fm, etc. manually identified, and accordingly print the results. Different content available on request to print
the reports and curves.

f.can output and print force - strain, force - displacement, force - time curve of 3 different forms.

5. Safety devices

When the test force exceeds the maximum test force each file to 2% -5%, the overload protection, shut down. When the piston reaches the upper limit raised position, the travel protection, pump motor stops.

6. Attached Accompanied by a full set includes

stretch attachments, accompanied by compression, bending attached.

7. Other

Install the debugging tools, seals, manual, certificate, packing list and other technical documents, see random.Main Performance Indicators.

NO. technical name parameters
1 maximum test force 600kN
2 Test Force showed the relative error ≤ ± 1%indication
3 Test Range biggest test of strength 2%~100%
4 Clamping way hydraulic clamping
5 Clamping diameter of round specimen Φ13~Φ40mm
6 flat plate specimen thickness 0~30mm
7 Width of flat plate specimen 80mm
8 Maximum tensile test space 550mm
9 maximum compression test space 450mm
10 Control cabinet dimensions 610×700×1100mm
11 Host Dimension (including the piston stroke) 920×630×2226mm
12 Motor power 2.1kW
13 host mass 2500kg
14 Column spacing 515mm
15 upper and lower pressure plate size 204×204mm
16 Support rollers spaced 600mm
17 Bending sticks roll width 140mm
18 allow bending 100mm
19 Shear specimen diameter Φ10mm
20 Piston stroke 200mm
21 Piston stroke about70mm/min
22 Test space to adjust the speed about150mm/min

System configuration list:
1 test machine host Fuel tank mounted under the host: 1
2 Oil source control cabinet : 1
3.Amplifiers:1
4 Amplified pressure sensor: 1
5 Extensometer: 1
6 Computer Measurement System and tension and compression, bending test software (GB228-2002, Windows XP operating system software, the Chinese version of test, backup CD) 1
7 PC HP:1
8 Printer HP:1