Belt Flex Tester - GE/05

Belt Flex Tester consists of two rollers on which a flat belt moves. The larger roller, which is the driving roller, rotates at - more info check here: http://www.buymeasuringtools.com/Belt-Flex-Tester-10143696/

Quick Brief

Place of Origin: Uttar Pradesh India Brand Name: Globe Model Number: GE/05 Power: Electronic Usage: Footwear Testing

Specifications and Product Details:

The GLOBE Belt Flex Tester consists of two rollers on which a flat belt moves. The larger roller, which is the driving roller, rotates at a desired speed with the help of an electric motor and V-belt arrangement to give the specified frequency of flexing. The second roller, which is the flexing roller, rotates with the movement of the belt.

The flexing rollers are slightly barreled shaped so as to minimize sideways movement of the belt. A hand wheel is attached to the front end of these rollers to enable the belt to be moved by hand. The equipment is supplied with three flexing rollers, one for normal soles, the second for very flexible soles, and the third for very hard soles.

The distance between the two rollers can be adjusted with the help of a screw arrangement to enable the belt to be mounted over different flexing rollers and to allow for small differences in belt length. This is done by turning a hand wheel on the side of the tester.

The tester is provided with an acrylic front cover and a sheet metal safety guard, which allows adequate circulation of cooling air round the test specimens during the test. The motor can be started only when the acrylic cover is closed.

A five digit pre–set type electronic counter with memory backup and an inductive sensor are provided to record the total numbers of cycles completed by the belt and thus the number of flexes undergone by the test specimens mounted on it. The motor stops automatically on completion of the set number of flexes.

The apparatus is finished in shore blue matalic and bright chrome / zinc plating to give it a corrosion resistant finish.