Batch Controllor Flow meter - KFL-DCD-100-1.6

KFL-DC Series Electromagnetic Flowmeters

1. introduction

KFL-DC series electromagnetic flowmetrs follow the faraday law of electromagnetic induction. They can be used to accurately measure the flowrate of liquids which are electrical conducting, chemical engineering, pharmacology, papermaking, electric power, environmental protection and so forth. Their antiknock level is EXDLLBT4

2. structure

KFL-DC series electromagnetic flowmeters are made up of sensor and transducer, together with LCD screen, current and pulse output, alarm signal and RS-485 communication.

3. Special Feature

Zero pressure losing;

Corrosion protection, abrasion resistant;

High accuracy, stable performance, high level of anti-vibration and anti-jamming, wide measuring dimensions.

4. Using Conditions

Ambient temperature: -10-60

Relative humidity: 85RH;

Atmospheric pressure: 86KPA-106KPA;

Applicable Fluid: electrically conduction liquid;

Fluid temperature:-25+65 and -25+140;

Electrical conductivity: 5us/cm.

5. technical parameters

size: DN10DN500

Standard pressure: PN1.0MPa40MPa;

Accuracy: ±0.5±1.0

Supply power: 85 to 250VAC(45 to 63Hz), 16 to 36VDC;

Signal output: current output: 010mA or 420mA;

Frequency Output: 05000Hz with photoelectric isolation;

Pulse output: 0.0011.000m³/cp, 0.0011.000Ltr/cp, 0.0011.000USG/cp, 0.0011.000UKG/cp;

Alarm output: upper alarm-ALMH, lower alarm-ALML with photoelectric isolation;

Communications: RS-232 without galvanic isolation, RS-485 WITH Galvanic isolation, MODBUS.

Flow ranges and meter sizes

Meter size

Min. flow range

Flow velocity

Max. flow range

Flow velocity

DN0to 0.5m/s 0 to 1.64ft/s 0to 10m/s 0 to 32.81ft/s

Mm inch l/min, m³/h gpm l/min, m³/h gpm