Baby-Stroller Handel Fatigue Tester
1.high quality with low price
2.provide completely technical support
Port: Shenzhen
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 130 Set/Sets per Month
Payment Terms: D/A,D/P,T/T,Western Union
Contact SupplierPackaging Detail: Strong wooden case
Delivery Detail: within 15 days when receiving the deposit
The machine description:
Stroller Handle Fatigue Tester is to evaluate the strength of the baby stroller reversible handle.
1. design criteria: EN1888 clause9.2, GB 14748 5.12
2. Power: 200V, 200W
Theroy:
1.Position the vehicle on a horizontal surface without the parking device applied.
2.Place the test mass as for the stability test. If the vehicle is designed for more than one child use any
number of appropriate test masses, up to one in each place intended to be occupied by a child.
3.Alternately raise and lower the handle(s) by applying a vertical force to the handle so that the rear wheels and
front wheels in turn are raised (120 ± 10) mm, measured at the start of the test from the floor and then lowered
in a controlled manner without pause (see Figure A).
4.Carry out the test for a total of 10 000 cycles at a frequency of (15 ± 2) cycles/min.