BZE-ST High Temperature Electronic Single Shot Inclinometer
Max operating work temperature is 250 temperature
Port: Beijing / Tianjin
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 1 Set/Sets per Week
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: Al alloy case insidecarton outsideinstrument carrying case: 510*260*110mmrunning gear carrying case:1260*260*160mm
Delivery Detail: within 10days after we receive the payment
Application Scope
1. Measuring the attitude parameters of petroleum deflected well engineering;
2. Measuring the bending of geological drilling;
3. Replacing singular shot imaging inclinometer;
Feartures:
1. In-built solid sensor component, with features of compact structure, light weight and high anti-vibration;
2. Special data processing instrument, capable of eliminating manual reading error;
3. Multi-group data tested for each measured point, with function of self-calibration;
4. Available timing operation: 1~99 minutes;
5. Special rechargeable battery cartridge used;
6. Output results can be save permanently with low cost of consumables;
7. Capable of monitoring voltage of battery .
Technical Parameters:
Measurement scope | Inclined angle | Azimuth | Orientation of magnetic operating face | Orientation of high side operating face |
0°--180° | 0°--360° | 0°--360° | 0°---360° | |
Precision | ±0.2° | ±1.0° | ±1.0° | ±1.0° |
Maximum operating temperature (with heat resistant sleeve): 250 | OD of external protection cartridge: Φ45mm | |||
Max. pressure withstood: 90Mpa | OD of probe tube:Φ27mm×500mm | |||
Impact resistance: 2000g, 0.5ms | OD of heat resistant sleeve: Φ31.75mm | |||
Shock resistance: 10g, 20100Hz | Communication interface: RS-232 | |||
Range of delay: 199min | Uninterrupted operating period ≥ 12h | |||
BZE-ST High Temperature /Small Diameter Electronic Single shot Inclinometer |