1.Disintegration tester is detecting disintegration of solid in prescriptive conditions.
2.Auto-test,auto-diagnose,auto-alarm
Port: Guangzhou/Shanghai
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 100 Set/Sets per Year
Payment Terms: T/T,Western Union,MoneyGram
Contact Supplier
Packaging Detail: Standard export carton
Delivery Detail: Within 15 day
BJ-1 Disintegration Tester(IQ/OQ/PQ Certificate)
Description
BJ series of instruments are used for detecting disintegration of solid in prescriptive conditions.
National standard (Chinese codex)/2005/
Corporate standard (Disintegration tester) Q/12XQ0188-2004
Features
1. There are six tubes in one basket assemblies.
2. Auto stop at timing point.
3. Automatic temperature controlled, with high precision temperature controllable.
4. The nacelle and rod is made of stainless steel.
5. It adopts micro-pump hot water circulation system; the temperature of bath liquid is even.
6. Intelligent automatic control of the temperature, time and frequency.
7. Parameters can be preset at anytime. The preset and real data can be displayed alternately in time.
8. Automation: auto-test, auto-diagnose, auto-alarm.
Specifications
| Basket assemblies | 1 |
| No. of tube | 6 |
| Volume of breaker | 1000ml |
| Nacelle up and down frequency | (30~32)/min |
| Nacelle up and down range | (55±1)mm |
| Min. distance of screen | (25±2)mm |
| Automatic timing range | (1~900)min |
| Precision of timing | ±0.5min |
| Temperature range | 20~45.0ºC |
| Precision of controlling temperature | ±0.5ºC |
| Power of heater | 500w |
| Continual working time | >24 hours |
| Power | 220V/50Hz 600w |
| Dimension | (260 x 300 x 420)mm³ |
| Weight | 11KG |
NOTE: MORE INFORMATION, PLEASE REFER TO
www.cn-pharmaceuticalmachinery.com
Model No.: CReader V
Features: Launch CReader V code scanner
1.diagnostic any vehicle that is OBD 2 /EOBD treaty
2.read/clear DTCs and live data in 2 modes
Model No.:
Features: launch CNC-602A Injector Cleaner & Tester, car repair tool
Model No.:
Features: launch CNC-602A Injector Cleaner & Tester, car repair tool
Model No.:
Features: is an advanced electromechanical product, which can clean and test injectors by simulating engine working cond...
Model No.: TJ270-30A
Features: 1 waves sphere: 4000cm-1~400cm-1
2 transmittance sphere: 0~100% (extend sphere -400%~400%)
3 absorbance sphere: 0-1A
Model No.: HT-225W
Features: 1. Applied to test hardness and strength
2. Measuring ranges: 10-60MPa
3. Impact energy: 2.207J
Model No.: JL645
Features: 1- stroke counter
2- 5-digit pulling mechanical counter
3- Counting speed: 300 times/minute
4- Transmission ratio: 1:1
Model No.: JL645
Features: 1- stroke counter
2- 5-digit pulling mechanical counter
3- Counting speed: 300 times/minute
4- Transmission ratio: 1:1
Model No.: XJJD-5
Features: I. 1t is used to do charpy impact tester
2.ISO 179 and the equivalent
3. digital display
4. Elevation of Striker: 150
Model No.: MFI-H
Features: MFI-H Melt flow indexer for MFR and MVR
1.Testing melting flow rate
2.Conform to ISO 1133:2005
3.Method: MFR, MVR
Model No.: ZLT-QL1
Features: IEC60245-2/1998-04 figure 1, IEC60227-2/1997-11 figure 1, IEC60065 /1998-07 Table 11
Model No.: STDZ-2
Features: 1. Point Load Apparatus
2. Digital dispaly type
3. Max. work pressure: 60Mpa
4. capacity: 100KN