Mechanical grease worker for cone penetration
The number of movements is up to 10000
GB/T 269 ASTM D217
North Dalian
Port: Dalian Port or other Port
Minimum Order Quantity: 1 Set/Sets Discussible
Supply Ability: 300 Set/Sets per Month Discussible
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram,Discussible
Contact SupplierPackaging Detail: Treated wooden package, according to the request of export.
Delivery Detail: According to your request and the actual situation
BF-38B Mechanical Grease Worker (for Cone Penetration)
1. Performance and Characteristics
Two sample can be tested at the same time; Automatic counting; Automatic stop; Show the number digitally; 60 times per minute; With a electronic counter that automatically shuts off the drive motor after any desired number of strokes up to 100000.
2. Technical Parameters
Working Power | 220V |
Power | 370W |
Movement | 60times/min |
Maximum number of movements | 100000 |
3. Structural Characteristics
This instrument is a double acting reciprocating test equipment, which consists of motor, turbo reducer, eccentric mechanism, working device and the base, etc.
The motor is horizontal single capacitor starting motor.
Turbo reducer: A two-way output shaft reducer, transmission ratio is 25:1. At both ends of the turbine shaft reducer installed a pair of eccentric mechanism.
Working device: installed on the base at both sides of the reducer and driven by the motor and eccentric mechanism. Work continuously with 60 times per minute.
4. Applicable Standard
BF-38B is according to the standards of GB/T 269 and ASTM D217. It's for "worked penetration" and "prolonged worked penetration" tests to determine consistency of lubricating greases.