BF-03A Tester for the Kinematic Viscosity of Oil(Kinematic viscometer) - BF-03A

BF-03A Tester for the Kinematic Viscosity of Oil(Kinematic viscometer)

2.Applicable Standards

BF03A Movement viscosity is determined in accordance with GB / T 265 design and manufacturing standards, and can be accurately described in strict accordance with the standards movement of petroleum products for the determination of viscosity.
BF03A Movement for measuring viscosity of liquid petroleum products measured (Newtonian liquid) viscosity of the campaign, the units of mm ² / s.
BF03A viscosity meter movement design beautiful, generous, reasonable structure design, easy to operate, the results of an accurate determination.

3.Apparatus Principle

At a constant temperature, the determination of a certain volume of liquid in the calibration of gravity down a good glass capillary viscometer of the time, the capillary viscometer and the flow time constant of the product, which is the temperature measured the movement of liquid viscosity degrees.

4.Structural characteristics

BF03A Movement viscosity meter table with digital temperature control thermostat bath temperature control, temperature control range of room temperature ~ 150 , temperature control accuracy of ± 0.1 . The use of digital temperature control table intuitive display settings temperature and actual temperature, temperature settings and easy to carry out the amendment temperature.
BF03A Movement detector viscosity viscometer equipped with four folders, can be measured in the sample temperature at the same time as other samples to be tested to improve the work efficiency. Cleverly designed viscometer folder, as long as the capillary viscometer viscometer folder can be inserted at the same time regulating viscometer folder location on the three screws will be able to facilitate capillary viscometer adjusted to a vertical position to increase the measured results accuracy.
BF-03A Movement bath temperature viscosity measuring device for the double-widetransparent to facilitate the operator to observe the specimen from the perspective of the flow in full compliance with the standard description of the results to improve the accuracy of the determination.