Automatic High Voltage Insulating Oil Tester/Analyzers, Electrical Instruments, Electronic Measuring Instruments, Measuring Inst

Test Method
The majority of high-voltage transformers, cables, switchgears, transducers, capacitors, and rectifiers use insulating oils for insulating electrically live parts and to carry off thermal energy. The quality of the insulating oil must be checked at regular intervals to ensure a long equipment service life. The most important requirement of an insulating oil is a high dielectric strength. Determination of the dielectric breakdown voltage of insulating oils provides an early detection method for any reduction in the insulating properties.

Features and Benefits
• Conforms to ASTM D877, D1816,IEC156 and related test specifications

• Suitable for all insulating fluids

• Fast cut-out of the high voltage immediately after oil dielectric breakdown

• Overtemperature protection system with power cut-out

IIJ-II Automatic High Voltage Insulating Oil Tester
The TOP Automatic High Voltage Insulating Oil Testers perform the determination of insulating oil dielectric breakdown for both single and multiple tests. The apparatus consists of a frame housing with LED display, sample compartment with indirect illumination, and a motor-driven rotary table. The measuring electrodes are swiveling and arranged eccentrically with respect to the axis of the table, enabling an easier cleaning and dispersing of any combustion sediments by the rotary motion. A thorough mixing of the oil is achieved by a magnetic rod inserted into the testing vessel. Contactless drive is provided by a small motor with an additional magnet below the lift. For operator security, the sample chamber is closed by a perspex door with an interlocking switch. A special safety feature locks the start button in case of improper electrical grounding.

IIJ-II (100KV) Specifications
Fully Automatic
ASTM D877, D1816,IEC156
BS EN 60156
Voltage Indication: Digital 0-100kV; ±1kV
Test Voltage: 0-100kVrms, symmetric
Voltage Increase: 0.5; 1; 2; 3; 5kV/Sec
Switch-off Time on BD: < 1ms
Switch-off Current: 4mA
Real Breakdown Monitoring (RBM): detects insulating liquids with specific
resistance too low
Relative Humidity: <90% not condensing
Ambient Temperature: Operating 32°F to 113°F (0°C to 45°C)
Storage -4°F to 131°F (-20°C to 55°C)
Power Consumption: Max. 200VA
Power Supply: 100-240V/50-60Hz
Weight: 83 lbs (37.6kg)
Dimensions lxwxh inches (cm): 17.75x18.125x19.75 (45x46x50)
Integrated Printer: 24 digit dot matrix with ink ribbon, paper width 2.25 inches
Interface: RS232
Additional Test Cycles: 5 (programmable)