Automatic CBR Compactor
1. Rammer: dia 50mm
2. Drop: Adjustable to 300mm or 450mm
3. Compaction rate: 29 blows/min
Port: Shanghai
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 10 Set/Sets per Week
Payment Terms: L/C,T/T,negotiable
Contact Supplier
Packaging Detail: Firm wooden case with polyfoam inside
Delivery Detail: 20 days after order confirmed
This testing machine automatically compact specimens, eliminating the laborious hand compaction method. The height and weight of the rammer are adjustable to suit
test requirements. The rammer travels across the mould and the table rotates the mould in equal steps on a base that is extremely stable, the table also pushes forward and pulls back the mould. Compaction cycle: the mould is pushed forward and rotated, getting six blows at the side in different directions; then pulled back and got one blow in the middle. The number of blows per layer can be set at the beginning of the test.
Specification
1. Mould: internal dia(1) 101.6mm, internal dia(2) 152.4mm,
2. Rammer: Circular faced, 50.8 mm dia, adjustable to 2.5 kg or 4.5 kg weight.
3. Compaction rate: 29 blows/min
4. Drop: Adjustable to 300 mm or 450 mm
5. Motor:370W, 1400rotate/min.
6. Dimensions: 380*640*1350 mm
7. Package weight: 260 kg
Features: Microcomputer control, ABS plastic vertical control cabinet. Pre-set blow pattern ensures even compaction,base plate can automatically pull and push, one blow in the center
Model No.: ST7003
Features: Rock Core Drilling Machine
1. Diamond bit: diameter 50-100mm
2. Max. drilling depth: 400mm
3. Max. drilling diameter: 100mm
Model No.: ST2019A
Features: Vicat apparatus
1mm diameter and 50mm long
Light,easy to operate.
Model No.: STSD-2/STSD-3
Features: 1. Motorised sand equivalent shaker
2. Stroke: 203 by1.0mm
3. Rate:180 by 2 strokes per min
Model No.: STYJL-2
Features: Blue Value Determination Test Set for Fine Aggregates
Model No.: Saturated surface dry mould and t...
Features: Saturated surface dry mould and tamping rod
Model No.: STSJ-1
Features: +Digital Hydrostatic Balance
+5000g/0.1g
Model No.: STHDY-1
Features: STHDY-1 Geosynthetic Material Thickness Testing Apparatus
Model No.: STYC-1
Features: 1. Max. Load: 60KN
2. Stroke of the jack:120mm
3.Timing range of the bearing plate:dia.300mm
Model No.: Slicing Machine
Features: +Slicing Machine
+It is applied to prepare specimen for tension test of waterproofing materials
Model No.: HY-727
Features: +Visible-infrared spectrometer
+wavelength range: 330--1000mm
+wavelength accuracy: 2mm
Model No.: STK-50
Features: +Load plate: 2500 cm2 1000cm2
+Hydraulic jack max. load: 50T
+Plate Bearing Plate Load Test Apparatus
Model No.: Desiccator
Features: Desiccator
1.Diameter:300mm
2.Diameter:240mm