1.thermocouples for glass industry
2.assembly sheathed temperature sensor type k
3.temp.0 to 1300C
4.explosionproof tc sensor
Port: Chongqing
Minimum Order Quantity: 1 Piece/Pieces customized
Supply Ability: 2000 Piece/Pieces per Week customized
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: standard export package according to your demand
Delivery Detail: in one week
Assembly Sheathed Thermocouple Type K for Glass Industry
1.thermocouples for glass industry
2.glass industry temperature sensors
3.bayonet mounting
4.brazed to the tube
5.assemblies
6.widely graduation mark :K ,strong inoxdiability
7.material of thermocouple:ni-cr/ni-al
8.installation means:fixed screw/flange,moveable screw/flange,cutting flange
9.mode of connection:junction box,direct lead wire,socket ,handle
10.protective tube diameter:10mm,12mm,14mm,16mm,20mm,25mm
11.junction box electric mout:M20*1.5,NPT1/2
12.protective grade:IP65
Introduction
This thermocouple is made for fiber glass insulated wire in a stainless steel tube. The element is normally brazed to the tube at the tip. Bayonet adaptor is used for mounting purpose. N most of the furnace thermocouples are placed in block pockets, but over a period of service it may get through hole. At crown there are number of points to measure in center, right & left, the same kind of assemblies can be used for regenerator crown as well.
Name | Calibration | Tolerance | |||
NiCr-NiSi WRNK or WRKK | N K | Class l | Class ll | ||
Tolerance | Temperature range°C | Tolerance | Temperature range°C | ||
±1.5°C or ±0.4%|t| | -40~13000 | ±2.5°C or ±0.75%|t| | -40~1300 |
order guideline
1.using temperature
2.diameter of thermometer
3.diameter and length and material of the two duplex probe
4.installation means(specification of screw and flange or neither)
5.protective grade
6.accuracy grade
company website:http://cqhaichen.en.alibaba.com/