Asphalt Needle Penetration Tester (Penetration of Bituminous Materials)/asphalt penetrometer - SZR-6

asphalt penetrometer

Chuck nut fixed styli to ensure that the needle bar with the stylus on the money in the same center. Displacement sensor detection, automatic penetration and displays the penetration process. With no effect on the asphalt surface cold light source lighting device. With the HW-30 low-temperature water bath to do the low-temperature penetration test. Advanced digital temperature sensor measurement is more accurate. Pin and connecting rod easy disassembly and convenient measurement of the quality of the needle. Configure the printer can be directly output. LCD and more intuitive.

asphalt penetrometer

to BSEN 1426:2000, IP 49-2000
Main features:

A chuck nut measuring needle to ensure that the needle bar with the stylus in the same center line.

Displacement sensor detection, and automatic penetration and displays the penetration process.

3 luminescent lighting devices, had no effect on the asphalt surface temperature.

Microscope up and down the fine-tuning technology, up and down on the needle is very convenient.

5 with the heating device (6,7-type standard).

With low temperature water bath to do the low-temperature penetration test

7 advanced digital temperature sensor measurement is more accurate.

8-pin and connecting rod easy disassembly, convenient to check the quality

9 to configure the printer can be directly output (7 standard).

10-pin into the display accuracy: 0.01mm.

11 LCD and more intuitive.

The main technical indicators:

Temperature range: -90 °C at room temperature.

Penetration time, the boot 5S, you can set your own.

3-pin into the range 0-40mm. Accuracy ± 0.01 mm.

4 time range 0-60s. Accuracy of ± 0.1s.

5 Measurement Range: -50-125.0 ° C Accuracy ± 0.1 ° C

6 ambient temperature: 5 ~ 40 ° C

Ambient humidity: 85%

8 Power supply voltage: 220V

9 Dimensions: 250x200x700mm

10 Power: 600w

11 Weight: 16KG

asphalt penetrometer